The purpose of this paper is to look at the various use cases for UAVs and how these different cases impact the ability of UAVs to communicate with other UAVs. This paper expects UAVs to be complementary to ground communication (General Aviation Manufacturers Association, executive summary) to fulfill their operational missions. More specifically, this white paper examines how the detect-and-avoid or collision avoidance use case can be used to form the basis of a vehicle-to-vehicle (V2V) communication protocol and message format. The proposed solution is intended to meet the needs of regulatory requirements, such as the Federal Aviation Administration's Remote ID), and other industry standards organizations, such as ASTM and RTCA, working on the Airborne Collision Avoidance System for Unmanned Aircraft (ACAS Xu) solution for UAVs, aerospace original equipment manufacturers (OEMs) building UAVs, and operators of UAVs. While security requirements and frequency usage were considered, the paper does not propose any detailed solutions in these areas as they will be offered by other sub-groups in the IEEE P1920.2 working group.
- Status
- Active Standard
- History
-
- Published:
- 2023-03-24
Working Group Details
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards