Load modeling plays an important role in power system modeling, and the load model is an indispensable component in power system simulation. To get accurate load models and formulate a unified document, this guide has been developed to provide comprehensive policies and procedures of load modeling and simulations. A review and comparison of the two most widely used methodologies for load modeling is presented in this document, that is, the measurement based and component-based approaches. A critical and updated overview of opportunities and challenges of load modeling with emerging networks and components is also provided. The guidelines for power system simulation with a variety of load models are proposed. A case study adhering to the proposed guidelines clearly indicates the need for a hybrid approach in the future that will combine the strengths of the measurement-based and component-based approaches with the data acquisition capabilities offered by modern measurement equipment.
- Sponsor Committee
- PE/SBLC - Smart Buildings, Loads and Customer Systems
- Status
- Active Standard
- PAR Approval
- 2018-05-14
- Board Approval
- 2022-05-13
- History
-
- Published:
- 2022-09-30
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/SBLC - Smart Buildings, Loads and Customer Systems
- Working Group
-
Loads/Load Model - Load Modeling and Simulation WG
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Jizhong Zhu
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards