Service binding and parameter specification via the DNS (DNS SVCB and HTTPS RRs)
draft-ietf-dnsop-svcb-https-08
The information below is for an old version of the document.
| Document | Type |
This is an older version of an Internet-Draft that was ultimately published as RFC 9460.
|
|
|---|---|---|---|
| Authors | Benjamin M. Schwartz , Mike Bishop , Erik Nygren | ||
| Last updated | 2022-03-03 (Latest revision 2021-10-12) | ||
| Replaces | draft-ietf-dnsop-svcb-httpssvc | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Formats | |||
| Reviews |
DNSDIR Last Call review
(of
-12)
by Matt Brown
Ready w/issues
INTDIR Telechat review
by Carlos Pignataro
Ready w/nits
TSVART Last Call review
(of
-07)
by Kyle Rose
Ready w/issues
GENART Last Call review
(of
-07)
by Dale Worley
Ready w/issues
|
||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | Submitted to IESG for Publication | |
| Document shepherd | Tim Wicinski | ||
| Shepherd write-up | Show Last changed 2021-07-14 | ||
| IESG | IESG state | Became RFC 9460 (Proposed Standard) | |
| Consensus boilerplate | Yes | ||
| Telechat date |
(None)
Needs one more YES or NO OBJECTION position to pass. |
||
| Responsible AD | Warren "Ace" Kumari | ||
| Send notices to | Tim Wicinski <tjw.ietf@gmail.com> | ||
| IANA | IANA review state | IANA - Not OK | |
| IANA expert review state | Expert Reviews OK |
draft-ietf-dnsop-svcb-https-08
DNSOP Working Group B. Schwartz
Internet-Draft Google
Intended status: Standards Track M. Bishop
Expires: 15 April 2022 E. Nygren
Akamai Technologies
12 October 2021
Service binding and parameter specification via the DNS (DNS SVCB and
HTTPS RRs)
draft-ietf-dnsop-svcb-https-08
Abstract
This document specifies the "SVCB" and "HTTPS" DNS resource record
(RR) types to facilitate the lookup of information needed to make
connections to network services, such as for HTTP origins. SVCB
records allow a service to be provided from multiple alternative
endpoints, each with associated parameters (such as transport
protocol configuration and keys for encrypting the TLS ClientHello).
They also enable aliasing of apex domains, which is not possible with
CNAME. The HTTPS RR is a variation of SVCB for use with HTTP [HTTP].
By providing more information to the client before it attempts to
establish a connection, these records offer potential benefits to
both performance and privacy.
TO BE REMOVED: This document is being collaborated on in Github at:
https://github.com/MikeBishop/dns-alt-svc
(https://github.com/MikeBishop/dns-alt-svc). The most recent working
version of the document, open issues, etc. should all be available
there. The authors (gratefully) accept pull requests.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 15 April 2022.
Schwartz, et al. Expires 15 April 2022 [Page 1]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Simplified BSD License text
as described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Goals of the SVCB RR . . . . . . . . . . . . . . . . . . 5
1.2. Overview of the SVCB RR . . . . . . . . . . . . . . . . . 5
1.3. Parameter for Encrypted ClientHello . . . . . . . . . . . 6
1.4. Terminology . . . . . . . . . . . . . . . . . . . . . . . 7
2. The SVCB record type . . . . . . . . . . . . . . . . . . . . 7
2.1. Zone file presentation format . . . . . . . . . . . . . . 8
2.2. RDATA wire format . . . . . . . . . . . . . . . . . . . . 9
2.3. SVCB query names . . . . . . . . . . . . . . . . . . . . 10
2.4. Interpretation . . . . . . . . . . . . . . . . . . . . . 10
2.4.1. SvcPriority . . . . . . . . . . . . . . . . . . . . . 11
2.4.2. AliasMode . . . . . . . . . . . . . . . . . . . . . . 11
2.4.3. ServiceMode . . . . . . . . . . . . . . . . . . . . . 12
2.5. Special handling of "." in TargetName . . . . . . . . . . 13
2.5.1. AliasMode . . . . . . . . . . . . . . . . . . . . . . 13
2.5.2. ServiceMode . . . . . . . . . . . . . . . . . . . . . 13
3. Client behavior . . . . . . . . . . . . . . . . . . . . . . . 13
3.1. Handling resolution failures . . . . . . . . . . . . . . 14
3.2. Clients using a Proxy . . . . . . . . . . . . . . . . . . 15
4. DNS Server Behavior . . . . . . . . . . . . . . . . . . . . . 16
4.1. Authoritative servers . . . . . . . . . . . . . . . . . . 16
4.2. Recursive resolvers . . . . . . . . . . . . . . . . . . . 16
4.3. General requirements . . . . . . . . . . . . . . . . . . 17
4.4. EDNS Client Subnet (ECS) . . . . . . . . . . . . . . . . 17
5. Performance optimizations . . . . . . . . . . . . . . . . . . 18
5.1. Optimistic pre-connection and connection reuse . . . . . 18
5.2. Generating and using incomplete responses . . . . . . . . 19
6. SVCB-compatible . . . . . . . . . . . . . . . . . . . . . . . 19
7. Initial SvcParamKeys . . . . . . . . . . . . . . . . . . . . 20
7.1. "alpn" and "no-default-alpn" . . . . . . . . . . . . . . 20
7.1.1. Representation . . . . . . . . . . . . . . . . . . . 21
7.1.2. Use . . . . . . . . . . . . . . . . . . . . . . . . . 22
Schwartz, et al. Expires 15 April 2022 [Page 2]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
7.2. "port" . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.3. "ech" . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.4. "ipv4hint" and "ipv6hint" . . . . . . . . . . . . . . . . 23
7.5. "mandatory" . . . . . . . . . . . . . . . . . . . . . . . 24
8. ServiceMode RR compatibility and mandatory keys . . . . . . . 24
9. Using Service Bindings with HTTP . . . . . . . . . . . . . . 25
9.1. Query names for HTTPS RRs . . . . . . . . . . . . . . . . 26
9.2. Comparison with Alt-Svc . . . . . . . . . . . . . . . . . 27
9.2.1. ALPN usage . . . . . . . . . . . . . . . . . . . . . 27
9.2.2. Untrusted channel . . . . . . . . . . . . . . . . . . 27
9.2.3. Cache lifetime . . . . . . . . . . . . . . . . . . . 27
9.2.4. Granularity . . . . . . . . . . . . . . . . . . . . . 28
9.3. Interaction with Alt-Svc . . . . . . . . . . . . . . . . 28
9.4. Requiring Server Name Indication . . . . . . . . . . . . 29
9.5. HTTP Strict Transport Security . . . . . . . . . . . . . 29
9.6. Use of HTTPS RRs in other protocols . . . . . . . . . . . 30
10. SVCB/HTTPS RR parameter for ECH configuration . . . . . . . . 30
10.1. Client behavior . . . . . . . . . . . . . . . . . . . . 31
10.2. Deployment considerations . . . . . . . . . . . . . . . 31
11. Zone Structures . . . . . . . . . . . . . . . . . . . . . . . 31
11.1. Structuring zones for flexibility . . . . . . . . . . . 31
11.2. Structuring zones for performance . . . . . . . . . . . 32
11.3. Examples . . . . . . . . . . . . . . . . . . . . . . . . 32
11.3.1. Protocol enhancements . . . . . . . . . . . . . . . 32
11.3.2. Apex aliasing . . . . . . . . . . . . . . . . . . . 33
11.3.3. Parameter binding . . . . . . . . . . . . . . . . . 33
11.3.4. Multi-CDN . . . . . . . . . . . . . . . . . . . . . 34
11.3.5. Non-HTTP uses . . . . . . . . . . . . . . . . . . . 36
12. Interaction with other standards . . . . . . . . . . . . . . 36
13. Security Considerations . . . . . . . . . . . . . . . . . . . 36
14. Privacy Considerations . . . . . . . . . . . . . . . . . . . 37
15. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 37
15.1. SVCB RRType . . . . . . . . . . . . . . . . . . . . . . 37
15.2. HTTPS RRType . . . . . . . . . . . . . . . . . . . . . . 38
15.3. New registry for Service Parameters . . . . . . . . . . 38
15.3.1. Procedure . . . . . . . . . . . . . . . . . . . . . 38
15.3.2. Initial contents . . . . . . . . . . . . . . . . . . 39
15.4. Other registry updates . . . . . . . . . . . . . . . . . 40
16. Acknowledgments and Related Proposals . . . . . . . . . . . . 41
17. References . . . . . . . . . . . . . . . . . . . . . . . . . 41
17.1. Normative References . . . . . . . . . . . . . . . . . . 41
17.2. Informative References . . . . . . . . . . . . . . . . . 44
Appendix A. Decoding text in zone files . . . . . . . . . . . . 45
A.1. Decoding a comma-separated list . . . . . . . . . . . . . 46
Appendix B. HTTP Mapping Summary . . . . . . . . . . . . . . . . 46
Appendix C. Comparison with alternatives . . . . . . . . . . . . 47
C.1. Differences from the SRV RR type . . . . . . . . . . . . 47
C.2. Differences from the proposed HTTP record . . . . . . . . 48
Schwartz, et al. Expires 15 April 2022 [Page 3]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
C.3. Differences from the proposed ANAME record . . . . . . . 48
C.4. Comparison with separate RR types for AliasMode and
ServiceMode . . . . . . . . . . . . . . . . . . . . . . . 48
Appendix D. Test vectors . . . . . . . . . . . . . . . . . . . . 49
D.1. AliasMode . . . . . . . . . . . . . . . . . . . . . . . . 49
D.2. ServiceMode . . . . . . . . . . . . . . . . . . . . . . . 49
D.3. Failure cases . . . . . . . . . . . . . . . . . . . . . . 54
Appendix E. Change history . . . . . . . . . . . . . . . . . . . 55
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 59
1. Introduction
The SVCB ("Service Binding") and HTTPS RRs provide clients with
complete instructions for access to a service. This information
enables improved performance and privacy by avoiding transient
connections to a sub-optimal default server, negotiating a preferred
protocol, and providing relevant public keys.
For example, HTTP clients currently resolve only A and/or AAAA
records for the origin hostname, learning only its IP addresses. If
an HTTP client learns more about the origin before connecting, it may
be able to upgrade "http" URLs to "https", enable HTTP/3 or Encrypted
ClientHello [ECH], or switch to an operationally preferable endpoint.
It is highly desirable to minimize the number of round-trips and
lookups required to learn this additional information.
The SVCB and HTTPS RRs also help when the operator of a service
wishes to delegate operational control to one or more other domains,
e.g. delegating the origin "https://example.com" to a service
operator endpoint at "svc.example.net". While this case can
sometimes be handled by a CNAME, that does not cover all use-cases.
CNAME is also inadequate when the service operator needs to provide a
bound collection of consistent configuration parameters through the
DNS (such as network location, protocol, and keying information).
This document first describes the SVCB RR as a general-purpose
resource record that can be applied directly and efficiently to a
wide range of services (Section 2). It also describes the rules for
defining other SVCB-compatible RR types (Section 6), starting with
the HTTPS RR type (Section 9), which provides improved efficiency and
convenience with HTTP by avoiding the need for an Attrleaf label
[Attrleaf] (Section 9.1).
The SVCB RR has two modes: 1) "AliasMode", which simply delegates
operational control for a resource; 2) "ServiceMode", which binds
together configuration information for a service endpoint.
ServiceMode provides additional key=value parameters within each
RDATA set.
Schwartz, et al. Expires 15 April 2022 [Page 4]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
1.1. Goals of the SVCB RR
The goal of the SVCB RR is to allow clients to resolve a single
additional DNS RR in a way that:
* Provides alternative endpoints that are authoritative for the
service, along with parameters associated with each of these
endpoints.
* Does not assume that all alternative endpoints have the same
parameters or capabilities, or are even operated by the same
entity. This is important, as DNS does not provide any way to tie
together multiple RRSets for the same name. For example, if
www.example.com is a CNAME alias that switches between one of
three CDNs or hosting environments, successive queries for that
name may return records that correspond to different environments.
* Enables CNAME-like functionality at a zone apex (such as
"example.com") for participating protocols, and generally enables
delegation of operational authority for an origin within the DNS
to an alternate name.
Additional goals specific to HTTPS RRs and the HTTP use-cases
include:
* Connect directly to HTTP/3 (QUIC transport) alternative endpoints
[HTTP3]
* Obtain the Encrypted ClientHello [ECH] keys associated with an
alternative endpoint
* Support non-default TCP and UDP ports
* Enable SRV-like benefits (e.g. apex delegation, as mentioned
above) for HTTP, where SRV [SRV] has not been widely adopted
* Provide an HSTS-like indication [HSTS] signaling that the "https"
scheme should be used instead of "http" for this request (see
Section 9.5).
1.2. Overview of the SVCB RR
This subsection briefly describes the SVCB RR in a non-normative
manner. (As mentioned above, this all applies equally to the HTTPS
RR which shares the same encoding, format, and high-level semantics.)
Schwartz, et al. Expires 15 April 2022 [Page 5]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
The SVCB RR has two modes: AliasMode, which aliases a name to another
name, and ServiceMode, which provides connection information bound to
a service endpoint domain. Placing both forms in a single RR type
allows clients to fetch the relevant information with a single query.
The SVCB RR has two required fields and one optional. The fields
are:
1. SvcPriority: The priority of this record (relative to others,
with lower values preferred). A value of 0 indicates AliasMode.
(Described in Section 2.4.1.)
2. TargetName: The domain name of either the alias target (for
AliasMode) or the alternative endpoint (for ServiceMode).
3. SvcParams (optional): A list of key=value pairs describing the
alternative endpoint at TargetName (only used in ServiceMode and
otherwise ignored). Described in Section 2.1.
Cooperating DNS recursive resolvers will perform subsequent record
resolution (for SVCB, A, and AAAA records) and return them in the
Additional Section of the response. Clients either use responses
included in the additional section returned by the recursive resolver
or perform necessary SVCB, A, and AAAA record resolutions. DNS
authoritative servers can attach in-bailiwick SVCB, A, AAAA, and
CNAME records in the Additional Section to responses for a SVCB
query.
In ServiceMode, the SvcParams of the SVCB RR provide an extensible
data model for describing alternative endpoints that are
authoritative for the origin, along with parameters associated with
each of these alternative endpoints.
For HTTP use-cases, the HTTPS RR enables many of the benefits of Alt-
Svc [AltSvc] without waiting for a full HTTP connection initiation
(multiple roundtrips) before learning of the preferred alternative,
and without necessarily revealing the user's intended destination to
all entities along the network path.
1.3. Parameter for Encrypted ClientHello
This document also defines a parameter for Encrypted ClientHello
[ECH] keys. See Section 10.
Schwartz, et al. Expires 15 April 2022 [Page 6]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
1.4. Terminology
Our terminology is based on the common case where the SVCB record is
used to access a resource identified by a URI whose authority field
contains a DNS hostname as the host.
* The "service" is the information source identified by the
authority and scheme of the URI, capable of providing access to
the resource. For "https" URIs, the "service" corresponds to an
"origin" [RFC6454].
* The "service name" is the host portion of the authority.
* The "authority endpoint" is the authority's hostname and a port
number implied by the scheme or specified in the URI.
* An "alternative endpoint" is a hostname, port number, and other
associated instructions to the client on how to reach an instance
of service.
Additional DNS terminology intends to be consistent with [DNSTerm].
SVCB is a contraction of "service binding". The SVCB RR, HTTPS RR,
and future RR types that share SVCB's formats and registry are
collectively known as SVCB-compatible RR types. The contraction
"SVCB" is also used to refer to this system as a whole.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. The SVCB record type
The SVCB DNS resource record (RR) type (RR type 64) is used to locate
alternative endpoints for a service.
The algorithm for resolving SVCB records and associated address
records is specified in Section 3.
Other SVCB-compatible resource record types can also be defined as-
needed (see Section 6). In particular, the HTTPS RR (RR type 65)
provides special handling for the case of "https" origins as
described in Section 9.
Schwartz, et al. Expires 15 April 2022 [Page 7]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
SVCB RRs are extensible by a list of SvcParams, which are pairs
consisting of a SvcParamKey and a SvcParamValue. Each SvcParamKey
has a presentation name and a registered number. Values are in a
format specific to the SvcParamKey. Their definition should specify
both their presentation format and wire encoding (e.g., domain names,
binary data, or numeric values). The initial SvcParamKeys and
formats are defined in Section 7.
2.1. Zone file presentation format
The presentation format of the record is:
Name TTL IN SVCB SvcPriority TargetName SvcParams
The SVCB record is defined specifically within the Internet ("IN")
Class ([RFC1035]).
SvcPriority is a number in the range 0-65535, TargetName is a
<domain-name> ([RFC1035], Section 5.1), and the SvcParams are a
whitespace-separated list, with each SvcParam consisting of a
SvcParamKey=SvcParamValue pair or a standalone SvcParamKey.
SvcParamKeys are subject to IANA control (Section 15.3).
Each SvcParamKey SHALL appear at most once in the SvcParams. In
presentation format, SvcParamKeys are lower-case alphanumeric
strings. Key names should contain 1-63 characters from the ranges
"a"-"z", "0"-"9", and "-". In ABNF [RFC5234],
alpha-lc = %x61-7A ; a-z
SvcParamKey = 1*63(alpha-lc / DIGIT / "-")
SvcParam = SvcParamKey ["=" SvcParamValue]
SvcParamValue = char-string
value = *OCTET
The SvcParamValue is parsed using the character-string decoding
algorithm (Appendix A), producing a value. The value is then
validated and converted into wire-format in a manner specific to each
key.
When the "=" is omitted, the value is interpreted as empty.
Arbitrary keys can be represented using the unknown-key presentation
format "keyNNNNN" where NNNNN is the numeric value of the key type
without leading zeros. A SvcParam in this form SHALL be parsed as
specified above, and the decoded value SHALL be used as its wire
format encoding.
Schwartz, et al. Expires 15 April 2022 [Page 8]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
For some SvcParamKeys, the value corresponds to a list or set of
items. Presentation formats for such keys SHOULD use a comma-
separated list (Appendix A.1).
SvcParams in presentation format MAY appear in any order, but keys
MUST NOT be repeated.
2.2. RDATA wire format
The RDATA for the SVCB RR consists of:
* a 2 octet field for SvcPriority as an integer in network byte
order.
* the uncompressed, fully-qualified TargetName, represented as a
sequence of length-prefixed labels as in Section 3.1 of [RFC1035].
* the SvcParams, consuming the remainder of the record (so smaller
than 65535 octets and constrained by the RDATA and DNS message
sizes).
When the list of SvcParams is non-empty, it contains a series of
SvcParamKey=SvcParamValue pairs, represented as:
* a 2 octet field containing the SvcParamKey as an integer in
network byte order. (See Section 15.3.2 for the defined values.)
* a 2 octet field containing the length of the SvcParamValue as an
integer between 0 and 65535 in network byte order.
* an octet string of this length whose contents are the
SvcParamValue in a format determined by the SvcParamKey.
SvcParamKeys SHALL appear in increasing numeric order.
Clients MUST consider an RR malformed if:
* the end of the RDATA occurs within a SvcParam.
* SvcParamKeys are not in strictly increasing numeric order.
* the SvcParamValue for an SvcParamKey does not have the expected
format.
Note that the second condition implies that there are no duplicate
SvcParamKeys.
Schwartz, et al. Expires 15 April 2022 [Page 9]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
If any RRs are malformed, the client MUST reject the entire RRSet and
fall back to non-SVCB connection establishment.
2.3. SVCB query names
When querying the SVCB RR, a service is translated into a QNAME by
prepending the service name with a label indicating the scheme,
prefixed with an underscore, resulting in a domain name like
"_examplescheme.api.example.com.". This follows the Attrleaf naming
pattern [Attrleaf], so the scheme MUST be registered appropriately
with IANA (see Section 12).
Protocol mapping documents MAY specify additional underscore-prefixed
labels to be prepended. For schemes that specify a port
(Section 3.2.3 of [URI]), one reasonable possibility is to prepend
the indicated port number if a non-default port number is specified.
We term this behavior "Port Prefix Naming", and use it in the
examples throughout this document.
See Section 9.1 for the HTTPS RR behavior.
When a prior CNAME or SVCB record has aliased to a SVCB record, each
RR shall be returned under its own owner name.
Note that none of these forms alter the origin or authority for
validation purposes. For example, TLS clients MUST continue to
validate TLS certificates for the original service name.
As an example, the owner of example.com could publish this record:
_8443._foo.api.example.com. 7200 IN SVCB 0 svc4.example.net.
to indicate that "foo://api.example.com:8443" is aliased to
"svc4.example.net". The owner of example.net, in turn, could publish
this record:
svc4.example.net. 7200 IN SVCB 3 svc4.example.net. (
alpn="bar" port="8004" ech="..." )
to indicate that these services are served on port number 8004, which
supports the protocol "bar" and its associated transport in addition
to the default transport protocol for "foo://".
(Parentheses are used to ignore a line break in DNS zone file
presentation format ([RFC1035], Section 5.1).)
2.4. Interpretation
Schwartz, et al. Expires 15 April 2022 [Page 10]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
2.4.1. SvcPriority
When SvcPriority is 0 the SVCB record is in AliasMode
(Section 2.4.2). Otherwise, it is in ServiceMode (Section 2.4.3).
Within a SVCB RRSet, all RRs SHOULD have the same Mode. If an RRSet
contains a record in AliasMode, the recipient MUST ignore any
ServiceMode records in the set.
RRSets are explicitly unordered collections, so the SvcPriority field
is used to impose an ordering on SVCB RRs. SVCB RRs with a smaller
SvcPriority value SHOULD be given preference over RRs with a larger
SvcPriority value.
When receiving an RRSet containing multiple SVCB records with the
same SvcPriority value, clients SHOULD apply a random shuffle within
a priority level to the records before using them, to ensure uniform
load-balancing.
2.4.2. AliasMode
In AliasMode, the SVCB record aliases a service to a TargetName.
SVCB RRSets SHOULD only have a single resource record in AliasMode.
If multiple are present, clients or recursive resolvers SHOULD pick
one at random.
The primary purpose of AliasMode is to allow aliasing at the zone
apex, where CNAME is not allowed. In AliasMode, the TargetName will
be the name of a domain that resolves to SVCB, AAAA, and/or A
records. (See Section 6 for aliasing of SVCB-compatible RR types.)
The TargetName SHOULD NOT be equal to the owner name, as this would
result in a loop.
In AliasMode, records SHOULD NOT include any SvcParams, and
recipients MUST ignore any SvcParams that are present.
For example, the operator of foo://example.com:8080 could point
requests to a service operating at foosvc.example.net by publishing:
_8080._foo.example.com. 3600 IN SVCB 0 foosvc.example.net.
Using AliasMode maintains a separation of concerns: the owner of
foosvc.example.net can add or remove ServiceMode SVCB records without
requiring a corresponding change to example.com. Note that if
foosvc.example.net promises to always publish a SVCB record, this
AliasMode record can be replaced by a CNAME, which would likely
improve performance.
Schwartz, et al. Expires 15 April 2022 [Page 11]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
AliasMode is especially useful for SVCB-compatible RR types that do
not require an underscore prefix, such as the HTTPS RR type. For
example, the operator of https://example.com could point requests to
a server at svc.example.net by publishing this record at the zone
apex:
example.com. 3600 IN HTTPS 0 svc.example.net.
Note that the SVCB record's owner name MAY be the canonical name of a
CNAME record, and the TargetName MAY be the owner of a CNAME record.
Clients and recursive resolvers MUST follow CNAMEs as normal.
To avoid unbounded alias chains, clients and recursive resolvers MUST
impose a limit on the total number of SVCB aliases they will follow
for each resolution request. This limit MUST NOT be zero, i.e.
implementations MUST be able to follow at least one AliasMode record.
The exact value of this limit is left to implementations.
For compatibility and performance, zone owners SHOULD NOT configure
their zones to require following multiple AliasMode records.
As legacy clients will not know to use this record, service operators
will likely need to retain fallback AAAA and A records alongside this
SVCB record, although in a common case the target of the SVCB record
might offer better performance, and therefore would be preferable for
clients implementing this specification to use.
AliasMode records only apply to queries for the specific RR type.
For example, a SVCB record cannot alias to an HTTPS record, nor vice-
versa.
2.4.3. ServiceMode
In ServiceMode, the TargetName and SvcParams within each resource
record associate an alternative endpoint for the service with its
connection parameters.
Each protocol scheme that uses SVCB MUST define a protocol mapping
that explains how SvcParams are applied for connections of that
scheme. Unless specified otherwise by the protocol mapping, clients
MUST ignore any SvcParam that they do not recognize.
Some SvcParams impose requirements on other SvcParams in the RR. A
ServiceMode RR is called "self-consistent" if its SvcParams all
comply with each others' requirements. Zone-file implementations
SHOULD enforce self-consistency. Clients MUST reject any RR whose
recognized SvcParams are not self-consistent, and MAY reject the
entire RRSet.
Schwartz, et al. Expires 15 April 2022 [Page 12]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
2.5. Special handling of "." in TargetName
If TargetName has the value "." (represented in the wire format as a
zero-length label), special rules apply.
2.5.1. AliasMode
For AliasMode SVCB RRs, a TargetName of "." indicates that the
service is not available or does not exist. This indication is
advisory: clients encountering this indication MAY ignore it and
attempt to connect without the use of SVCB.
2.5.2. ServiceMode
For ServiceMode SVCB RRs, if TargetName has the value ".", then the
owner name of this record MUST be used as the effective TargetName.
For example, in the following example "svc2.example.net" is the
effective TargetName:
example.com. 7200 IN HTTPS 0 svc.example.net.
svc.example.net. 7200 IN CNAME svc2.example.net.
svc2.example.net. 7200 IN HTTPS 1 . port=8002 ech="..."
svc2.example.net. 300 IN A 192.0.2.2
svc2.example.net. 300 IN AAAA 2001:db8::2
3. Client behavior
"SVCB resolution" is the process of enumerating the priority-ordered
endpoints for a service, as performed by the client. SVCB resolution
is implemented as follows:
1. Let $QNAME be the service name plus appropriate prefixes for the
scheme (see Section 2.3).
2. Issue a SVCB query for $QNAME.
3. If an AliasMode SVCB record is returned for $QNAME (after
following CNAMEs as normal), set $QNAME to its TargetName
(without additional prefixes) and loop back to step 2, subject to
chain length limits and loop detection heuristics (see
Section 3.1).
4. If one or more "compatible" (Section 8) ServiceMode records are
returned, these represent the alternative endpoints.
5. Otherwise, SVCB resolution has failed, and the list of known
endpoints is empty.
Schwartz, et al. Expires 15 April 2022 [Page 13]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
This procedure does not rely on any recursive or authoritative DNS
server to comply with this specification or have any awareness of
SVCB.
A client is called "SVCB-optional" if it can connect without the use
of ServiceMode records, and "SVCB-reliant" otherwise. Clients for
pre-existing protocols (e.g. HTTP) SHALL implement SVCB-optional
behavior (except as noted in Section 3.1 and Section 10.1).
SVCB-optional clients SHOULD issue in parallel any other DNS queries
that might be needed for connection establishment if the SVCB record
is absent, in order to minimize delay in that case and enable the
optimizations discussed in Section 5.
Once SVCB resolution has concluded, whether successful or not, SVCB-
optional clients SHALL append to the priority list an endpoint
consisting of the final value of $QNAME, the authority endpoint's
port number, and no SvcParams. (This endpoint will be attempted
before falling back to non-SVCB connection modes. This ensures that
SVCB-optional clients will make use of an AliasMode record whose
TargetName has A and/or AAAA records but no SVCB records.)
The client proceeds with connection establishment using the resolved
list of endpoints. Clients SHOULD try higher-priority alternatives
first, with fallback to lower-priority alternatives. Clients resolve
AAAA and/or A records for the selected TargetName, and MAY choose
between them using an approach such as Happy Eyeballs
[HappyEyeballsV2].
If the client is SVCB-optional, and connecting using this list of
endpoints has failed, the client SHOULD attempt non-SVCB connection
modes.
Some important optimizations are discussed in Section 5 to avoid
additional latency in comparison to ordinary AAAA/A lookups.
3.1. Handling resolution failures
If DNS responses are cryptographically protected (e.g. using DNSSEC
or TLS [DoT][DoH]), and SVCB resolution fails due to an
authentication error, SERVFAIL response, transport error, or timeout,
the client SHOULD abandon the connection attempt even if the client
is SVCB-optional. Otherwise, an active attacker could mount a
downgrade attack by denying the user access to the SvcParams.
A SERVFAIL error can occur if the domain is DNSSEC-signed, the
recursive resolver is DNSSEC-validating, and the attacker is between
the recursive resolver and the authoritative DNS server. A transport
Schwartz, et al. Expires 15 April 2022 [Page 14]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
error or timeout can occur if an active attacker between the client
and the recursive resolver is selectively dropping SVCB queries or
responses, based on their size or other observable patterns.
If the client enforces DNSSEC validation on A/AAAA responses, it
SHOULD apply the same validation policy to SVCB.
If the client is unable to complete SVCB resolution due to its chain
length limit, the client SHOULD fall back to the authority endpoint,
as if the origin's SVCB record did not exist.
3.2. Clients using a Proxy
Clients using a domain-oriented transport proxy like HTTP CONNECT
([RFC7231], Section 4.3.6) or SOCKS5 ([RFC1928]) have the option to
use named destinations, in which case the client does not perform any
A or AAAA queries for destination domains. If the client is using
named destinations with a proxy that does not provide SVCB query
capability (e.g. through an affiliated DNS resolver), the client
would have to perform SVCB resolution separately, likely disclosing
the destinations to additional parties. Clients that support such
proxies SHOULD arrange for a separate SVCB resolution procedure with
appropriate privacy properties, or disable SVCB resolution entirely
if SVCB-optional.
If the client does use SVCB and named destinations, the client SHOULD
follow the standard SVCB resolution process, selecting the smallest-
SvcPriority option that is compatible with the client and the proxy.
When connecting using a SVCB record, clients MUST provide the final
TargetName and port to the proxy, which will perform any required A
and AAAA lookups.
This arrangement has several benefits:
* Compared to disabling SVCB:
- It allows the client to use the SvcParams, if present, which
are only usable with a specific TargetName. The SvcParams may
include information that enhances performance (e.g. alpn) and
privacy (e.g. ech).
- It allows the service to delegate the apex domain.
* Compared to providing the proxy with an IP address:
- It allows the proxy to select between IPv4 and IPv6 addresses
for the server according to its configuration.
Schwartz, et al. Expires 15 April 2022 [Page 15]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
- It ensures that the proxy receives addresses based on its
network geolocation, not the client's.
- It enables faster fallback for TCP destinations with multiple
addresses of the same family.
4. DNS Server Behavior
4.1. Authoritative servers
When replying to a SVCB query, authoritative DNS servers SHOULD
return A, AAAA, and SVCB records in the Additional Section for any
TargetNames that are in the zone. If the zone is signed, the server
SHOULD also include positive or negative DNSSEC responses for these
records in the Additional section.
See Section 4.4 for exceptions.
4.2. Recursive resolvers
Whether or not the recursive resolver is aware of SVCB, the normal
response construction process (i.e. unknown RR type resolution under
[RFC3597]) generates the Answer section of the response. Recursive
resolvers that are aware of SVCB SHOULD help the client to execute
the procedure in Section 3 with minimum overall latency by
incorporating additional useful information into the Additional
section of the response as follows:
1. Incorporate the results of SVCB resolution. If the chain length
limit has been reached, terminate.
2. If any of the resolved SVCB records are in AliasMode, choose one
of them at random, and resolve SVCB, A, and AAAA records for its
TargetName.
* If any SVCB records are resolved, go to step 1.
* Otherwise, incorporate the results of A and AAAA resolution,
and terminate.
3. All the resolved SVCB records are in ServiceMode. Resolve A and
AAAA queries for each TargetName (or for the owner name if
TargetName is "."), incorporate all the results, and terminate.
Schwartz, et al. Expires 15 April 2022 [Page 16]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
In this procedure, "resolve" means the resolver's ordinary recursive
resolution procedure, as if processing a query for that RRSet. This
includes following any aliases that the resolver would ordinarily
follow (e.g. CNAME, DNAME [DNAME]). Errors or anomalies in
obtaining additional records MAY cause this process to terminate, but
MUST NOT themselves cause the resolver to send a failure response.
See Section 2.4.2 for additional safeguards for recursive resolvers
to implement to mitigate loops.
See Section 5.2 for possible optimizations of this procedure.
4.3. General requirements
Recursive resolvers MUST be able to convey SVCB records with
unrecognized SvcParamKeys, and MAY treat the entire SvcParams portion
of the record as opaque, even if the contents are invalid.
Alternatively, recursive resolvers MAY report an error such as
SERVFAIL to avoid returning a SvcParamValue that is invalid according
to the SvcParam's specification. For complex value types whose
interpretation might differ between implementations or have
additional future allowed values added (e.g. URIs or "alpn"),
resolvers SHOULD limit validation to specified constraints.
When responding to a query that includes the DNSSEC OK bit
([RFC3225]), DNSSEC-capable recursive and authoritative DNS servers
MUST accompany each RRSet in the Additional section with the same
DNSSEC-related records that they would send when providing that RRSet
as an Answer (e.g. RRSIG, NSEC, NSEC3).
According to Section 5.4.1 of [RFC2181], "Unauthenticated RRs
received and cached from ... the additional data section ... should
not be cached in such a way that they would ever be returned as
answers to a received query. They may be returned as additional
information where appropriate.". Recursive resolvers therefore MAY
cache records from the Additional section for use in populating
Additional section responses, and MAY cache them for general use if
they are authenticated by DNSSEC.
4.4. EDNS Client Subnet (ECS)
The EDNS Client Subnet option (ECS, [RFC7871]) allows recursive
resolvers to request IP addresses that are suitable for a particular
client IP range. SVCB records may contain IP addresses (in ipv*hint
SvcParams), or direct users to a subnet-specific TargetName, so
recursive resolvers SHOULD include the same ECS option in SVCB
queries as in A/AAAA queries.
Schwartz, et al. Expires 15 April 2022 [Page 17]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
According to Section 7.3.1 of [RFC7871], "Any records from [the
Additional section] MUST NOT be tied to a network". Accordingly,
when processing a response whose QTYPE is SVCB-compatible, resolvers
SHOULD treat any records in the Additional section as having SOURCE
PREFIX-LENGTH zero and SCOPE PREFIX-LENGTH as specified in the ECS
option. Authoritative servers MUST omit such records if they are not
suitable for use by any stub resolvers that set SOURCE PREFIX-LENGTH
to zero. This will cause the resolver to perform a followup query
that can receive properly tailored ECS. (This is similar to the
usage of CNAME with ECS discussed in [RFC7871], Section 7.2.1.)
Authoritative servers that omit Additional records can avoid the
added latency of a followup query by following the advice in
Section 11.2.
5. Performance optimizations
For optimal performance (i.e. minimum connection setup time), clients
SHOULD implement a client-side DNS cache. Responses in the
Additional section of a SVCB response SHOULD be placed in cache
before performing any followup queries. With this behavior, and
conforming DNS servers, using SVCB does not add network latency to
connection setup.
To improve performance when using a non-conforming recursive
resolver, clients SHOULD issue speculative A and/or AAAA queries in
parallel with each SVCB query, based on a predicted value of
TargetName (see Section 11.2).
After a ServiceMode RRSet is received, clients MAY try more than one
option in parallel, and MAY prefetch A and AAAA records for multiple
TargetNames.
5.1. Optimistic pre-connection and connection reuse
If an address response arrives before the corresponding SVCB
response, the client MAY initiate a connection as if the SVCB query
returned NODATA, but MUST NOT transmit any information that could be
altered by the SVCB response until it arrives. For example, a TLS
ClientHello can be altered by the "ech" value of a SVCB response
(Section 7.3). Clients implementing this optimization SHOULD wait
for 50 milliseconds before starting optimistic pre-connection, as per
the guidance in [HappyEyeballsV2].
Schwartz, et al. Expires 15 April 2022 [Page 18]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
A SVCB record is consistent with a connection if the client would
attempt an equivalent connection when making use of that record. If
a SVCB record is consistent with an active or in-progress connection
C, the client MAY prefer that record and use C as its connection.
For example, suppose the client receives this SVCB RRSet for a
protocol that uses TLS over TCP:
_1234._bar.example.com. 300 IN SVCB 1 svc1.example.net. (
ech="111..." ipv6hint=2001:db8::1 port=1234 )
SVCB 2 svc2.example.net. (
ech="222..." ipv6hint=2001:db8::2 port=1234 )
If the client has an in-progress TCP connection to
[2001:db8::2]:1234, it MAY proceed with TLS on that connection using
ech="222...", even though the other record in the RRSet has higher
priority.
If none of the SVCB records are consistent with any active or in-
progress connection, clients proceed with connection establishment as
described in Section 3.
5.2. Generating and using incomplete responses
When following the procedure in Section 4.2, recursive resolvers MAY
terminate the procedure early and produce a reply that omits some of
the associated RRSets. This is REQUIRED when the chain length limit
is reached (Section 4.2 step 1), but might also be appropriate when
the maximum response size is reached, or when responding before fully
chasing dependencies would improve performance. When omitting
certain RRSets, recursive resolvers SHOULD prioritize information for
smaller-SvcPriority records.
As discussed in Section 3, clients MUST be able to fetch additional
information that is required to use a SVCB record, if it is not
included in the initial response. As a performance optimization, if
some of the SVCB records in the response can be used without
requiring additional DNS queries, the client MAY prefer those
records, regardless of their priorities.
6. SVCB-compatible
An RR type is called "SVCB-compatible" if it permits an
implementation that is identical to SVCB in its:
* RDATA presentation format
* RDATA wire format
Schwartz, et al. Expires 15 April 2022 [Page 19]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
* IANA registry used for SvcParamKeys
* Authoritative server Additional Section processing
* Recursive resolution process
* Relevant Class (i.e. Internet ("IN") [RFC1035])
This allows authoritative and recursive DNS servers to apply
identical processing to all SVCB-compatible RR types.
All other behaviors described as applying to the SVCB RR also apply
to all SVCB-compatible RR types unless explicitly stated otherwise.
When following an AliasMode record (Section 2.4.2) of RR type $T ,
the followup query to the TargetName MUST also be for type $T.
This document defines one SVCB-compatible RR type (other than SVCB
itself): the HTTPS RR type (Section 9), which avoids Attrleaf label
prefixes [Attrleaf] in order to improve compatibility with wildcards
and CNAMEs, which are widely used with HTTP.
Standards authors should consider carefully whether to use SVCB or
define a new SVCB-compatible RR type, as this choice cannot easily be
reversed after deployment.
7. Initial SvcParamKeys
A few initial SvcParamKeys are defined here. These keys are useful
for the "https" scheme, and most are applicable to other schemes as
well.
Each new protocol mapping document MUST specify which keys are
applicable and safe to use. Protocol mappings MAY alter the
interpretation of SvcParamKeys but MUST NOT alter their presentation
or wire formats.
7.1. "alpn" and "no-default-alpn"
The "alpn" and "no-default-alpn" SvcParamKeys together indicate the
set of Application Layer Protocol Negotiation (ALPN) protocol
identifiers [ALPN] and associated transport protocols supported by
this service endpoint (the "SVCB ALPN set").
Schwartz, et al. Expires 15 April 2022 [Page 20]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
As with Alt-Svc [AltSvc], each ALPN protocol identifier is used to
identify the application protocol and associated suite of protocols
supported by the endpoint (the "protocol suite"). The presence of an
ALPN protocol identifier in the SVCB ALPN set indicates that this
service endpoint, described by TargetName and the other parameters
(e.g. "port") offers service with the protocol suite associated with
this ALPN identifier.
Clients filter the set of ALPN identifiers to match the protocol
suites they support, and this informs the underlying transport
protocol used (such as QUIC-over-UDP or TLS-over-TCP). ALPN protocol
identifiers that do not uniquely identify a protocol suite (e.g. an
Identification Sequence that can be used with both TLS and DTLS) are
not compatible with this SvcParamKey and MUST NOT be included in the
SVCB ALPN set.
7.1.1. Representation
ALPNs are identified by their registered "Identification Sequence"
(alpn-id), which is a sequence of 1-255 octets.
alpn-id = 1*255OCTET
For "alpn", the presentation value SHALL be a comma-separated list
(Appendix A.1) of one or more alpn-ids. Zone file implementations
MAY disallow the "," and "\" characters instead of implementing the
value-list escaping procedure, relying on the opaque key format (e.g.
key1=\002h2) in the event that these characters are needed.
The wire format value for "alpn" consists of at least one alpn-id
prefixed by its length as a single octet, and these length-value
pairs are concatenated to form the SvcParamValue. These pairs MUST
exactly fill the SvcParamValue; otherwise, the SvcParamValue is
malformed.
For "no-default-alpn", the presentation and wire format values MUST
be empty. When "no-default-alpn" is specified in an RR, "alpn" must
also be specified in order for the RR to be "self-consistent"
(Section 2.4.3).
Each scheme that uses this SvcParamKey defines a "default set" of
ALPNs that are supported by nearly all clients and servers, which MAY
be empty. To determine the SVCB ALPN set, the client starts with the
list of alpn-ids from the "alpn" SvcParamKey, and adds the default
set unless the "no-default-alpn" SvcParamKey is present.
Schwartz, et al. Expires 15 April 2022 [Page 21]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
7.1.2. Use
To establish a connection to the endpoint, clients MUST
1. Let SVCB-ALPN-Intersection be the set of protocols in the SVCB
ALPN set that the client supports.
2. Let Intersection-Transports be the set of transports (e.g. TLS,
DTLS, QUIC) implied by the protocols in SVCB-ALPN-Intersection.
3. For each transport in Intersection-Transports, construct a
ProtocolNameList containing the Identification Sequences of all
the client's supported ALPN protocols for that transport, without
regard to the SVCB ALPN set.
For example, if the SVCB ALPN set is ["http/1.1", "h3"], and the
client supports HTTP/1.1, HTTP/2, and HTTP/3, the client could
attempt to connect using TLS over TCP with a ProtocolNameList of
["http/1.1", "h2"], and could also attempt a connection using QUIC,
with a ProtocolNameList of ["h3"].
Once the client has constructed a ClientHello, protocol negotiation
in that handshake proceeds as specified in [ALPN], without regard to
the SVCB ALPN set.
Clients MAY implement a fallback procedure, using a less-preferred
transport if more-preferred transports fail to connect. This
fallback behavior is vulnerable to manipulation by a network attacker
who blocks the more-preferred transports, but it may be necessary for
compatibility with existing networks.
With this procedure in place, an attacker who can modify DNS and
network traffic can prevent a successful transport connection, but
cannot otherwise interfere with ALPN protocol selection. This
procedure also ensures that each ProtocolNameList includes at least
one protocol from the SVCB ALPN set.
Clients SHOULD NOT attempt connection to a service endpoint whose
SVCB ALPN set does not contain any supported protocols. To ensure
consistency of behavior, clients MAY reject the entire SVCB RRSet and
fall back to basic connection establishment if all of the RRs
indicate "no-default-alpn", even if connection could have succeeded
using a non-default alpn.
For compatibility with clients that require default transports, zone
operators SHOULD ensure that at least one RR in each RRSet supports
the default transports.
Schwartz, et al. Expires 15 April 2022 [Page 22]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
7.2. "port"
The "port" SvcParamKey defines the TCP or UDP port that should be
used to reach this alternative endpoint. If this key is not present,
clients SHALL use the authority endpoint's port number.
The presentation value of the SvcParamValue is a single decimal
integer between 0 and 65535 in ASCII. Any other value (e.g. an empty
value) is a syntax error. To enable simpler parsing, this SvcParam
MUST NOT contain escape sequences.
The wire format of the SvcParamValue is the corresponding 2 octet
numeric value in network byte order.
If a port-restricting firewall is in place between some client and
the service endpoint, changing the port number might cause that
client to lose access to the service, so operators should exercise
caution when using this SvcParamKey to specify a non-default port.
7.3. "ech"
The SvcParamKey to enable Encrypted ClientHello (ECH) is "ech". Its
value is defined in Section 10. It is applicable to most TLS-based
protocols.
When publishing a record containing an "ech" parameter, the publisher
MUST ensure that all IP addresses of TargetName correspond to servers
that have access to the corresponding private key or are
authoritative for the public name. (See Section 7.2.2 of [ECH] for
more details about the public name.) This yields an anonymity set of
cardinality equal to the number of ECH-enabled server domains
supported by a given client-facing server. Thus, even with an
encrypted ClientHello, an attacker who can enumerate the set of ECH-
enabled domains supported by a client-facing server can guess the
correct SNI with probability at least 1/K, where K is the size of
this ECH-enabled server anonymity set. This probability may be
increased via traffic analysis or other mechanisms.
7.4. "ipv4hint" and "ipv6hint"
The "ipv4hint" and "ipv6hint" keys convey IP addresses that clients
MAY use to reach the service. If A and AAAA records for TargetName
are locally available, the client SHOULD ignore these hints.
Otherwise, clients SHOULD perform A and/or AAAA queries for
TargetName as in Section 3, and clients SHOULD use the IP address in
those responses for future connections. Clients MAY opt to terminate
any connections using the addresses in hints and instead switch to
the addresses in response to the TargetName query. Failure to use A
Schwartz, et al. Expires 15 April 2022 [Page 23]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
and/or AAAA response addresses could negatively impact load balancing
or other geo-aware features and thereby degrade client performance.
The presentation value SHALL be a comma-separated list (Appendix A.1)
of one or more IP addresses of the appropriate family in standard
textual format [RFC5952]. To enable simpler parsing, this
SvcParamValue MUST NOT contain escape sequences.
The wire format for each parameter is a sequence of IP addresses in
network byte order. Like an A or AAAA RRSet, the list of addresses
represents an unordered collection, and clients SHOULD pick addresses
to use in a random order. An empty list of addresses is invalid.
When selecting between IPv4 and IPv6 addresses to use, clients may
use an approach such as Happy Eyeballs [HappyEyeballsV2]. When only
"ipv4hint" is present, IPv6-only clients may synthesize IPv6
addresses as specified in [RFC7050] or ignore the "ipv4hint" key and
wait for AAAA resolution (Section 3). Recursive resolvers MUST NOT
perform DNS64 ([RFC6147]) on parameters within a SVCB record. For
best performance, server operators SHOULD include an "ipv6hint"
parameter whenever they include an "ipv4hint" parameter.
These parameters are intended to minimize additional connection
latency when a recursive resolver is not compliant with the
requirements in Section 4, and SHOULD NOT be included if most clients
are using compliant recursive resolvers. When TargetName is the
origin hostname or the owner name (which can be written as "."),
server operators SHOULD NOT include these hints, because they are
unlikely to convey any performance benefit.
7.5. "mandatory"
See Section 8.
8. ServiceMode RR compatibility and mandatory keys
In a ServiceMode RR, a SvcParamKey is considered "mandatory" if the
RR will not function correctly for clients that ignore this
SvcParamKey. Each SVCB protocol mapping SHOULD specify a set of keys
that are "automatically mandatory", i.e. mandatory if they are
present in an RR. The SvcParamKey "mandatory" is used to indicate
any mandatory keys for this RR, in addition to any automatically
mandatory keys that are present.
Schwartz, et al. Expires 15 April 2022 [Page 24]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
A ServiceMode RR is considered "compatible" with a client if the
client recognizes all the mandatory keys, and their values indicate
that successful connection establishment is possible. If the SVCB
RRSet contains no compatible RRs, the client will generally act as if
the RRSet is empty.
The presentation value SHALL be a comma-separated list (Appendix A.1)
of one or more valid SvcParamKeys, either by their registered name or
in the unknown-key format (Section 2.1). Keys MAY appear in any
order, but MUST NOT appear more than once. For self-consistency
(Section 2.4.3), listed keys MUST also appear in the SvcParams.
To enable simpler parsing, this SvcParamValue MUST NOT contain escape
sequences.
For example, the following is a valid list of SvcParams:
ech=... key65333=ex1 key65444=ex2 mandatory=key65444,ech
In wire format, the keys are represented by their numeric values in
network byte order, concatenated in ascending order.
This SvcParamKey is always automatically mandatory, and MUST NOT
appear in its own value-list. Other automatically mandatory keys
SHOULD NOT appear in the list either. (Including them wastes space
and otherwise has no effect.)
9. Using Service Bindings with HTTP
Use of any protocol with SVCB requires a protocol-specific mapping
specification. This section specifies the mapping for the "http" and
"https" URI schemes [I-D.draft-ietf-httpbis-semantics].
To enable special handling for HTTP use-cases, the HTTPS RR type is
defined as a SVCB-compatible RR type, specific to the "https" and
"http" schemes. Clients MUST NOT perform SVCB queries or accept SVCB
responses for "https" or "http" schemes.
The presentation format of the record is:
Name TTL IN HTTPS SvcPriority TargetName SvcParams
Schwartz, et al. Expires 15 April 2022 [Page 25]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
All the SvcParamKeys defined in Section 7 are permitted for use in
HTTPS RRs. The default set of ALPN IDs is the single value
"http/1.1". The "automatically mandatory" keys (Section 8) are
"port" and "no-default-alpn". (As described in Section 8, clients
must either implement these keys or ignore any RR in which they
appear.) Clients that restrict the destination port in "https" URIs
(e.g. using the "bad ports" list from [FETCH]) SHOULD apply the same
restriction to the "port" SvcParam.
The presence of an HTTPS RR for an origin also indicates that clients
should connect securely and use the "https" scheme, as discussed in
Section 9.5. This allows HTTPS RRs to apply to pre-existing "http"
scheme URLs, while ensuring that the client uses a secure and
authenticated connection.
The HTTPS RR parallels the concepts introduced in the HTTP
Alternative Services proposed standard [AltSvc]. Clients and servers
that implement HTTPS RRs are not required to implement Alt-Svc.
9.1. Query names for HTTPS RRs
The HTTPS RR uses Port Prefix Naming (Section 2.3), with one
modification: if the scheme is "https" and the port is 443, then the
client's original QNAME is equal to the service name (i.e. the
origin's hostname), without any prefix labels.
By removing the Attrleaf labels [Attrleaf] used in SVCB, this
construction enables offline DNSSEC signing of wildcard domains,
which are commonly used with HTTP. Using the service name as the
owner name of the HTTPS record, without prefixes, also allows the
targets of existing CNAME chains (e.g. CDN hosts) to start returning
HTTPS RR responses without requiring origin domains to configure and
maintain an additional delegation.
Following of HTTPS AliasMode RRs and CNAME aliases is unchanged from
SVCB.
Clients always convert "http" URLs to "https" before performing an
HTTPS RR query using the process described in Section 9.5, so domain
owners MUST NOT publish HTTPS RRs with a prefix of "_http".
Note that none of these forms alter the HTTPS origin or authority.
For example, clients MUST continue to validate TLS certificate
hostnames based on the origin.
Schwartz, et al. Expires 15 April 2022 [Page 26]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
9.2. Comparison with Alt-Svc
Publishing a ServiceMode HTTPS RR in DNS is intended to be similar to
transmitting an Alt-Svc field value over HTTP, and receiving an HTTPS
RR is intended to be similar to receiving that field value over HTTP.
However, there are some differences in the intended client and server
behavior.
9.2.1. ALPN usage
Unlike Alt-Svc Field Values, HTTPS RRs can contain multiple ALPN IDs.
The meaning and use of these IDs is discussed in Section 7.1.2.
9.2.2. Untrusted channel
HTTPS records do not require or provide any assurance of
authenticity. (DNSSEC signing and verification, which would provide
such assurance, are OPTIONAL.) The DNS resolution process is modeled
as an untrusted channel that might be controlled by an attacker, so
Alt-Svc parameters that cannot be safely received in this model MUST
NOT have a corresponding defined SvcParamKey. For example, there is
no SvcParamKey corresponding to the Alt-Svc "persist" parameter,
because this parameter is not safe to accept over an untrusted
channel.
9.2.3. Cache lifetime
There is no SvcParamKey corresponding to the Alt-Svc "ma" (max age)
parameter. Instead, server operators encode the expiration time in
the DNS TTL.
The appropriate TTL value might be different from the "ma" value used
for Alt-Svc, depending on the desired efficiency and agility. Some
DNS caches incorrectly extend the lifetime of DNS records beyond the
stated TTL, so server operators cannot rely on HTTPS RRs expiring on
time. Shortening the TTL to compensate for incorrect caching is NOT
RECOMMENDED, as this practice impairs the performance of correctly
functioning caches and does not guarantee faster expiration from
incorrect caches. Instead, server operators SHOULD maintain
compatibility with expired records until they observe that nearly all
connections have migrated to the new configuration.
Schwartz, et al. Expires 15 April 2022 [Page 27]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
9.2.4. Granularity
Sending Alt-Svc over HTTP allows the server to tailor the Alt-Svc
Field Value specifically to the client. When using an HTTPS RR,
groups of clients will necessarily receive the same SvcParams.
Therefore, HTTPS RRs are not suitable for uses that require single-
client granularity.
9.3. Interaction with Alt-Svc
Clients that implement support for both Alt-Svc and HTTPS records
SHOULD retrieve any HTTPS records for the Alt-Svc alt-authority, and
ensure that their connection attempts are consistent with both the
Alt-Svc parameters and any received HTTPS SvcParams. If present, the
HTTPS record's TargetName and port are used for connection
establishment (as in Section 3). For example, suppose that
"https://example.com" sends an Alt-Svc field value of:
Alt-Svc: h2="alt.example:443", h2="alt2.example:443", h3=":8443"
The client would retrieve the following HTTPS records:
alt.example. IN HTTPS 1 . alpn=h2,h3 ech=...
alt2.example. IN HTTPS 1 alt2b.example. alpn=h3 ech=...
_8443._https.example.com. IN HTTPS 1 alt3.example. (
port=9443 alpn=h2,h3 ech=... )
Based on these inputs, the following connection attempts would always
be allowed:
* HTTP/2 to alt.example:443
* HTTP/3 to alt3.example:9443
* Fallback to the the client's non-Alt-Svc connection behavior
ECH-capable clients would use ECH when establishing any of these
connections.
The following connection attempts would not be allowed:
* HTTP/3 to alt.example:443 (not consistent with Alt-Svc)
* Any connection to alt2b.example (no ALPN consistent with both the
HTTPS record and Alt-Svc)
* HTTPS over TCP to any port on alt3.example (not consistent with
Alt-Svc)
Schwartz, et al. Expires 15 April 2022 [Page 28]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
The following Alt-Svc-only connection attempts would be allowed only
if the client does not support ECH, as they rely on SVCB-optional
fallback behavior that the client will disable if it implements
support for ECH and the "ech" SvcParam is present (Section 10.1):
* HTTP/2 to alt2.example:443
* HTTP/3 to example.com:8443
Origins that publish an "ech" SvcParam in their HTTPS record SHOULD
also publish an "ech" SvcParam for any alt-authorities. Otherwise,
clients might reveal the name of the server in an unencrypted
ClientHello. Similar consistency considerations could apply to
future SvcParamKeys, so alt-authorities SHOULD carry the same
SvcParams as the origin unless a deviation is specifically known to
be safe.
As noted in Section 2.4 of [AltSvc], clients MAY disallow any Alt-Svc
connection according to their own criteria, e.g. disallowing Alt-Svc
connections that lack ECH support when there is an active ECH-
protected connection for this origin.
9.4. Requiring Server Name Indication
Clients MUST NOT use an HTTPS RR response unless the client supports
TLS Server Name Indication (SNI) and indicates the origin name when
negotiating TLS. This supports the conservation of IP addresses.
Note that the TLS SNI (and also the HTTP "Host" or ":authority") will
indicate the origin, not the TargetName.
9.5. HTTP Strict Transport Security
An HTTPS RR directs the client to communicate with this host only
over a secure transport, similar to HTTP Strict Transport Security
[HSTS]. Prior to making an "http" scheme request, the client SHOULD
perform a lookup to determine if any HTTPS RRs exist for that origin.
To do so, the client SHOULD construct a corresponding "https" URL as
follows:
1. Replace the "http" scheme with "https".
2. If the "http" URL explicitly specifies port 80, specify port 443.
3. Do not alter any other aspect of the URL.
This construction is equivalent to Section 8.3 of [HSTS], point 5.
Schwartz, et al. Expires 15 April 2022 [Page 29]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
If an HTTPS RR query for this "https" URL returns any AliasMode HTTPS
RRs, or any compatible ServiceMode HTTPS RRs (see Section 8), the
client SHOULD behave as if it has received an HTTP 307 (Temporary
Redirect) status code with this "https" URL in the "Location" field.
(Receipt of an incompatible ServiceMode RR does not trigger the
redirect behavior.) Because HTTPS RRs are received over an often
insecure channel (DNS), clients MUST NOT place any more trust in this
signal than if they had received a 307 redirect over cleartext HTTP.
If this redirection would result in a loss of functionality (e.g.
important resources that are only available on the "http" origin),
the operator MUST NOT publish an HTTPS RR.
When an "https" connection fails due to an error in the underlying
secure transport, such as an error in certificate validation, some
clients currently offer a "user recourse" that allows the user to
bypass the security error and connect anyway. When making an "https"
scheme request to an origin with an HTTPS RR, either directly or via
the above redirect, such a client MAY remove the user recourse
option. Origins that publish HTTPS RRs therefore MUST NOT rely on
user recourse for access. For more information, see Section 8.4 and
Section 12.1 of [HSTS].
9.6. Use of HTTPS RRs in other protocols
All protocols employing "http://" or "https://" URLs SHOULD respect
HTTPS RRs. For example, clients that support HTTPS RRs and implement
the altered WebSocket [WebSocket] opening handshake from the W3C
Fetch specification [FETCH] SHOULD use HTTPS RRs for the requestURL.
Such protocols MAY define their own SVCB mappings, which MAY be
defined to take precedence over HTTPS RRs.
10. SVCB/HTTPS RR parameter for ECH configuration
The SVCB "ech" parameter is defined for conveying the ECH
configuration of an alternative endpoint. In wire format, the value
of the parameter is an ECHConfigList [ECH], including the redundant
length prefix. In presentation format, the value is a single
ECHConfigList encoded in Base64 [base64]. Base64 is used here to
simplify integration with TLS server software. To enable simpler
parsing, this SvcParam MUST NOT contain escape sequences.
When ECH is in use, the TLS ClientHello is divided into an
unencrypted "outer" and an encrypted "inner" ClientHello. The outer
ClientHello is an implementation detail of ECH, and its contents are
controlled by the ECHConfig in accordance with [ECH]. The inner
ClientHello is used for establishing a connection to the service, so
its contents may be influenced by other SVCB parameters. For
Schwartz, et al. Expires 15 April 2022 [Page 30]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example, the requirements on the ProtocolNameList in Section 7.1
apply only to the inner ClientHello. Similarly, it is the inner
ClientHello whose Server Name Indication identifies the desired
service.
10.1. Client behavior
The SVCB-optional client behavior specified in Section 3 permits
clients to fall back to a direct connection if all SVCB options fail.
This behavior is not suitable for ECH, because fallback would negate
the privacy benefits of ECH. Accordingly, ECH-capable SVCB-optional
clients MUST switch to SVCB-reliant connection establishment if SVCB
resolution succeeded (following Section 3) and all alternative
endpoints have an "ech" key.
As a latency optimization, clients MAY prefetch DNS records that will
only be used in SVCB-optional mode.
10.2. Deployment considerations
An HTTPS RRSet containing some RRs with "ech" and some without is
vulnerable to a downgrade attack. This configuration is NOT
RECOMMENDED. Zone owners who do use such a mixed configuration
SHOULD mark the RRs with "ech" as more preferred (i.e. smaller
SvcPriority) than those without, in order to maximize the likelihood
that ECH will be used in the absence of an active adversary.
11. Zone Structures
11.1. Structuring zones for flexibility
Each ServiceMode RRSet can only serve a single scheme. The scheme is
indicated by the owner name and the RR type. For the generic SVCB RR
type, this means that each owner name can only be used for a single
scheme. The underscore prefixing requirement (Section 2.3) ensures
that this is true for the initial query, but it is the responsibility
of zone owners to choose names that satisfy this constraint when
using aliases, including CNAME and AliasMode records.
When using the generic SVCB RR type with aliasing, zone owners SHOULD
choose alias target names that indicate the scheme in use (e.g.
foosvc.example.net for foo:// schemes). This will help to avoid
confusion when another scheme needs to be added to the configuration.
Schwartz, et al. Expires 15 April 2022 [Page 31]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
11.2. Structuring zones for performance
To avoid a delay for clients using a nonconforming recursive
resolver, domain owners SHOULD minimize the use of AliasMode records,
and SHOULD choose TargetName according to a predictable convention
that is known to the client, so that clients can issue A and/or AAAA
queries for TargetName in advance (see Section 5). Unless otherwise
specified, the convention is to set TargetName to the service name
for an initial ServiceMode record, or to "." if it is reached via an
alias. For foo://foo.example.com:8080, this might look like:
$ORIGIN example.com. ; Origin
foo 3600 IN CNAME foosvc.example.net.
_8080._foo.foo 3600 IN CNAME foosvc.example.net.
$ORIGIN example.net. ; Service provider zone
foosvc 3600 IN SVCB 1 . key65333=...
foosvc 300 IN AAAA 2001:db8::1
Domain owners SHOULD avoid using a TargetName that is below a DNAME,
as this is likely unnecessary and makes responses slower and larger.
Also, zone structures that require following more than 8 aliases
(counting both AliasMode and CNAME records) are NOT RECOMMENDED.
11.3. Examples
11.3.1. Protocol enhancements
Consider a simple zone of the form:
$ORIGIN simple.example. ; Simple example zone
@ 300 IN A 192.0.2.1
AAAA 2001:db8::1
The domain owner could add this record:
@ 7200 IN HTTPS 1 . alpn=h3
to indicate that https://simple.example supports QUIC in addition to
TLS over TCP (the implicit default). The record could also include
other information (e.g. non-standard port, ECH configuration). For
https://simple.example:8443, the record would be:
_8443._https 7200 IN HTTPS 1 . alpn=h3
These records also respectively tell clients to replace the scheme
with "https" when loading http://simple.example or
http://simple.example:8443.
Schwartz, et al. Expires 15 April 2022 [Page 32]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
11.3.2. Apex aliasing
Consider a zone that is using CNAME aliasing:
$ORIGIN aliased.example. ; A zone that is using a hosting service
; Subdomain aliased to a high-performance server pool
www 7200 IN CNAME pool.svc.example.
; Apex domain on fixed IPs because CNAME is not allowed at the apex
@ 300 IN A 192.0.2.1
IN AAAA 2001:db8::1
With HTTPS RRs, the owner of aliased.example could alias the apex by
adding one additional record:
@ 7200 IN HTTPS 0 pool.svc.example.
With this record in place, HTTPS-RR-aware clients will use the same
server pool for aliased.example and www.aliased.example. (They will
also upgrade "http://aliased.example/..." to "https".) Non-HTTPS-RR-
aware clients will just ignore the new record.
Similar to CNAME, HTTPS RRs have no impact on the origin name. When
connecting, clients will continue to treat the authoritative origins
as "https://www.aliased.example" and "https://aliased.example",
respectively, and will validate TLS server certificates accordingly.
11.3.3. Parameter binding
Suppose that svc.example's default server pool supports HTTP/2, and
it has deployed HTTP/3 on a new server pool with a different
configuration. This can be expressed in the following form:
$ORIGIN svc.example. ; A hosting provider.
pool 7200 IN HTTPS 1 h3pool alpn=h2,h3 ech="123..."
HTTPS 2 . alpn=h2 ech="abc..."
pool 300 IN A 192.0.2.2
AAAA 2001:db8::2
h3pool 300 IN A 192.0.2.3
AAAA 2001:db8::3
This configuration is entirely compatible with the "Apex aliasing"
example, whether the client supports HTTPS RRs or not. If the client
does support HTTPS RRs, all connections will be upgraded to HTTPS,
and clients will use HTTP/3 if they can. Parameters are "bound" to
each server pool, so each server pool can have its own protocol, ECH
configuration, etc.
Schwartz, et al. Expires 15 April 2022 [Page 33]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
11.3.4. Multi-CDN
The HTTPS RR is intended to support HTTPS services operated by
multiple independent entities, such as different Content Delivery
Networks (CDNs) or different hosting providers. This includes the
case where a service is migrated from one operator to another, as
well as the case where the service is multiplexed between multiple
operators for performance, redundancy, etc.
This example shows such a configuration, with www.customer.example
having different DNS responses to different queries, either over time
or due to logic within the authoritative DNS server:
; This zone contains/returns different CNAME records
; at different points-in-time. The RRset for "www" can
; only ever contain a single CNAME.
; Sometimes the zone has:
$ORIGIN customer.example. ; A Multi-CDN customer domain
www 900 IN CNAME cdn1.svc1.example.
; and other times it contains:
$ORIGIN customer.example.
www 900 IN CNAME customer.svc2.example.
; and yet other times it contains:
$ORIGIN customer.example.
www 900 IN CNAME cdn3.svc3.example.
; With the following remaining constant and always included:
$ORIGIN customer.example. ; A Multi-CDN customer domain
; The apex is also aliased to www to match its configuration
@ 7200 IN HTTPS 0 www
; Non-HTTPS-aware clients use non-CDN IPs
A 203.0.113.82
AAAA 2001:db8:203::2
; Resolutions following the cdn1.svc1.example
; path use these records.
; This CDN uses a different alternative service for HTTP/3.
$ORIGIN svc1.example. ; domain for CDN 1
cdn1 1800 IN HTTPS 1 h3pool alpn=h3 ech="123..."
HTTPS 2 . alpn=h2 ech="123..."
A 192.0.2.2
AAAA 2001:db8:192::4
h3pool 300 IN A 192.0.2.3
AAAA 2001:db8:192:7::3
Schwartz, et al. Expires 15 April 2022 [Page 34]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
; Resolutions following the customer.svc2.example
; path use these records.
; Note that this CDN only supports HTTP/2.
$ORIGIN svc2.example. ; domain operated by CDN 2
customer 300 IN HTTPS 1 . alpn=h2 ech="xyz..."
60 IN A 198.51.100.2
A 198.51.100.3
A 198.51.100.4
AAAA 2001:db8:198::7
AAAA 2001:db8:198::12
; Resolutions following the customer.svc2.example
; path use these records.
; Note that this CDN has no HTTPS records
; and thus no ECH support.
$ORIGIN svc3.example. ; domain operated by CDN 3
cdn3 60 IN A 203.0.113.8
AAAA 2001:db8:113::8
Note that in the above example, the different CDNs have different ECH
configurations and different capabilities, but clients will use HTTPS
RRs as a bound-together unit.
Domain owners should be cautious when using a multi-CDN
configuration, as it introduces a number of complexities highlighted
by this example:
* If CDN 1 supports ECH, and CDN 2 does not, the client is
vulnerable to ECH downgrade by a network adversary who forces
clients to get CDN 2 records.
* Aliasing the apex to its subdomain simplifies the zone file but
likely increases resolution latency, especially when using a non-
HTTPS-aware recursive resolver. An alternative would be to alias
the zone apex directly to a name managed by a CDN.
* The A, AAAA, and HTTPS resolutions are independent lookups, so
clients may observe and follow different CNAMEs to different CDNs.
Clients may thus find a TargetName pointing to a name other than
the one which returned along with the A and AAAA lookups and will
need to do an additional resolution for them. Including ipv6hint
and ipv4hint will reduce the performance impact of this case.
* If not all CDNs publish HTTPS records, clients will sometimes
receive NODATA for HTTPS queries (as with cdn3.svc3.example
above), and thus no "ech" SvcParam, but could receive A/AAAA
records from a different CDN which does support ECH. Clients will
be unable to use ECH in this case.
Schwartz, et al. Expires 15 April 2022 [Page 35]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
11.3.5. Non-HTTP uses
For protocols other than HTTP, the SVCB RR and an Attrleaf label
[Attrleaf] will be used. For example, to reach an example resource
of "baz://api.example.com:8765", the following SVCB record would be
used to alias it to "svc4-baz.example.net." which in-turn could
return AAAA/A records and/or SVCB records in ServiceMode:
_8765._baz.api.example.com. 7200 IN SVCB 0 svc4-baz.example.net.
HTTPS RRs use similar Attrleaf labels if the origin contains a non-
default port.
12. Interaction with other standards
This standard is intended to reduce connection latency and improve
user privacy. Server operators implementing this standard SHOULD
also implement TLS 1.3 [RFC8446] and OCSP Stapling [RFC6066], both of
which confer substantial performance and privacy benefits when used
in combination with SVCB records.
To realize the greatest privacy benefits, this proposal is intended
for use over a privacy-preserving DNS transport (like DNS over TLS
[DoT] or DNS over HTTPS [DoH]). However, performance improvements,
and some modest privacy improvements, are possible without the use of
those standards.
Any specification for use of SVCB with a protocol MUST have an entry
for its scheme under the SVCB RR type in the IANA DNS Underscore
Global Scoped Entry Registry [Attrleaf]. The scheme SHOULD have an
entry in the IANA URI Schemes Registry [RFC7595]. The scheme SHOULD
have a defined specification for use with SVCB.
13. Security Considerations
SVCB/HTTPS RRs are intended for distribution over untrusted channels,
and clients are REQUIRED to verify that the alternative endpoint is
authoritative for the service (similar to Section 2.1 of [AltSvc]).
Therefore, DNSSEC signing and validation are OPTIONAL for publishing
and using SVCB and HTTPS RRs.
Clients MUST ensure that their DNS cache is partitioned for each
local network, or flushed on network changes, to prevent a local
adversary in one network from implanting a forged DNS record that
allows them to track users or hinder their connections after they
leave that network.
Schwartz, et al. Expires 15 April 2022 [Page 36]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
An attacker who can prevent SVCB resolution can deny clients any
associated security benefits. A hostile recursive resolver can
always deny service to SVCB queries, but network intermediaries can
often prevent resolution as well, even when the client and recursive
resolver validate DNSSEC and use a secure transport. These downgrade
attacks can prevent the "https" upgrade provided by the HTTPS RR
(Section 9.5), and disable the encryption enabled by the "ech"
SvcParamKey (Section 10). To prevent downgrades, Section 3.1
recommends that clients abandon the connection attempt when such an
attack is detected.
A hostile DNS intermediary might forge AliasMode "." records
(Section 2.5.1) as a way to block clients from accessing particular
services. Such an adversary could already block entire domains by
forging erroneous responses, but this mechanism allows them to target
particular protocols or ports within a domain. Clients that might be
subject to such attacks SHOULD ignore AliasMode "." records.
A hostile DNS intermediary or origin can return SVCB records
indicating any IP address and port number, including IP addresses
inside the local network and port numbers assigned to internal
services. If the attacker can influence the client's payload (e.g.
TLS session ticket contents), and an internal service has a
sufficiently lax parser, it's possible that the attacker could gain
unintended access. (The same concerns apply to SRV records, HTTP
Alt-Svc, and HTTP redirects.) As a mitigation, SVCB mapping
documents SHOULD indicate any port number restrictions that are
appropriate for the supported transports.
14. Privacy Considerations
Standard address queries reveal the user's intent to access a
particular domain. This information is visible to the recursive
resolver, and to many other parties when plaintext DNS transport is
used. SVCB queries, like queries for SRV records and other specific
RR types, additionally reveal the user's intent to use a particular
protocol. This is not normally sensitive information, but it should
be considered when adding SVCB support in a new context.
15. IANA Considerations
15.1. SVCB RRType
This document defines a new DNS RR type, SVCB, whose value 64 has
been allocated by IANA from the "Resource Record (RR) TYPEs"
subregistry of the "Domain Name System (DNS) Parameters" registry:
* Type: SVCB
Schwartz, et al. Expires 15 April 2022 [Page 37]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
* Value: 64
* Meaning: General Purpose Service Binding
* Reference: This document
15.2. HTTPS RRType
This document defines a new DNS RR type, "HTTPS", whose value 65 has
been allocated by IANA from the "Resource Record (RR) TYPEs"
subregistry of the "Domain Name System (DNS) Parameters" registry:
* Type: HTTPS
* Value: 65
* Meaning: Service Binding type for use with HTTP
* Reference: This document
15.3. New registry for Service Parameters
IANA is requested to create a new registry, entitled "Service
Parameter Keys (SvcParamKeys)". This registry defines the namespace
for parameters, including string representations and numeric
SvcParamKey values. This registry is shared with other SVCB-
compatible RR types, such as the HTTPS RR.
ACTION: create this registry, on a new page entitled "DNS Service
Bindings (SVCB)" under the "Domain Name System (DNS) Parameters"
category.
15.3.1. Procedure
A registration MUST include the following fields:
* Number: wire format numeric identifier (range 0-65535)
* Name: unique presentation name
* Meaning: a short description
* Format Reference: pointer to specification text
The characters in the registered Name MUST be lower-case alphanumeric
or "-" (Section 2.1). The name MUST NOT start with "key" or
"invalid".
Schwartz, et al. Expires 15 April 2022 [Page 38]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
Entries in this registry are subject to a First Come First Served
registration policy ([RFC8126], Section 4.4). The Format Reference
MUST specify how to convert the SvcParamValue's presentation format
to wire format and MAY detail its intended meaning and use. An entry
MAY specify a Format Reference of the form "Same as (other key Name)"
if it uses the same presentation and wire formats as an existing key.
This arrangement supports the development of new parameters while
ensuring that zone files can be made interoperable.
15.3.2. Initial contents
The "Service Binding (SVCB) Parameter Registry" shall initially be
populated with the registrations below:
Schwartz, et al. Expires 15 April 2022 [Page 39]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
+=============+=================+================+=================+
| Number | Name | Meaning | Format |
| | | | Reference |
+=============+=================+================+=================+
| 0 | mandatory | Mandatory keys | (This document) |
| | | in this RR | Section 8 |
+-------------+-----------------+----------------+-----------------+
| 1 | alpn | Additional | (This document) |
| | | supported | Section 7.1 |
| | | protocols | |
+-------------+-----------------+----------------+-----------------+
| 2 | no-default-alpn | No support for | (This document) |
| | | default | Section 7.1 |
| | | protocol | |
+-------------+-----------------+----------------+-----------------+
| 3 | port | Port for | (This document) |
| | | alternative | Section 7.2 |
| | | endpoint | |
+-------------+-----------------+----------------+-----------------+
| 4 | ipv4hint | IPv4 address | (This document) |
| | | hints | Section 7.4 |
+-------------+-----------------+----------------+-----------------+
| 5 | ech | Encrypted | (This document) |
| | | ClientHello | Section 7.3 |
| | | info | |
+-------------+-----------------+----------------+-----------------+
| 6 | ipv6hint | IPv6 address | (This document) |
| | | hints | Section 7.4 |
+-------------+-----------------+----------------+-----------------+
| 65280-65534 | N/A | Private Use | (This document) |
+-------------+-----------------+----------------+-----------------+
| 65535 | N/A | Reserved | (This document) |
| | | ("Invalid | |
| | | key") | |
+-------------+-----------------+----------------+-----------------+
Table 1
15.4. Other registry updates
Per [Attrleaf], please add the following entry to the DNS Underscore
Global Scoped Entry Registry:
Schwartz, et al. Expires 15 April 2022 [Page 40]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
+=========+============+=================+=================+
| RR TYPE | _NODE NAME | Meaning | Reference |
+=========+============+=================+=================+
| HTTPS | _https | HTTPS SVCB info | (This document) |
+---------+------------+-----------------+-----------------+
Table 2
16. Acknowledgments and Related Proposals
There have been a wide range of proposed solutions over the years to
the "CNAME at the Zone Apex" challenge proposed. These include
[I-D.bellis-dnsop-http-record], [I-D.ietf-dnsop-aname], and others.
Thank you to Ian Swett, Ralf Weber, Jon Reed, Martin Thomson, Lucas
Pardue, Ilari Liusvaara, Tim Wicinski, Tommy Pauly, Chris Wood, David
Benjamin, Mark Andrews, Emily Stark, Eric Orth, Kyle Rose, Craig
Taylor, Dan McArdle, Brian Dickson, Willem Toorop, Pieter Lexis,
Puneet Sood, Olivier Poitrey, Mashooq Muhaimen, Tom Carpay, and many
others for their feedback and suggestions on this draft.
17. References
17.1. Normative References
[ALPN] Friedl, S., Popov, A., Langley, A., and E. Stephan,
"Transport Layer Security (TLS) Application-Layer Protocol
Negotiation Extension", RFC 7301, DOI 10.17487/RFC7301,
July 2014, <https://www.rfc-editor.org/rfc/rfc7301>.
[Attrleaf] Crocker, D., "Scoped Interpretation of DNS Resource
Records through "Underscored" Naming of Attribute Leaves",
BCP 222, RFC 8552, DOI 10.17487/RFC8552, March 2019,
<https://www.rfc-editor.org/rfc/rfc8552>.
[base64] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<https://www.rfc-editor.org/rfc/rfc4648>.
[DNAME] Rose, S. and W. Wijngaards, "DNAME Redirection in the
DNS", RFC 6672, DOI 10.17487/RFC6672, June 2012,
<https://www.rfc-editor.org/rfc/rfc6672>.
[DoH] Hoffman, P. and P. McManus, "DNS Queries over HTTPS
(DoH)", RFC 8484, DOI 10.17487/RFC8484, October 2018,
<https://www.rfc-editor.org/rfc/rfc8484>.
Schwartz, et al. Expires 15 April 2022 [Page 41]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
[DoT] Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D.,
and P. Hoffman, "Specification for DNS over Transport
Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May
2016, <https://www.rfc-editor.org/rfc/rfc7858>.
[ECH] Rescorla, E., Oku, K., Sullivan, N., and C. A. Wood, "TLS
Encrypted Client Hello", Work in Progress, Internet-Draft,
draft-ietf-tls-esni-13, 12 August 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-tls-
esni-13>.
[HappyEyeballsV2]
Schinazi, D. and T. Pauly, "Happy Eyeballs Version 2:
Better Connectivity Using Concurrency", RFC 8305,
DOI 10.17487/RFC8305, December 2017,
<https://www.rfc-editor.org/rfc/rfc8305>.
[HSTS] Hodges, J., Jackson, C., and A. Barth, "HTTP Strict
Transport Security (HSTS)", RFC 6797,
DOI 10.17487/RFC6797, November 2012,
<https://www.rfc-editor.org/rfc/rfc6797>.
[HTTP] Fielding, R. T., Nottingham, M., and J. Reschke, "HTTP
Semantics", Work in Progress, Internet-Draft, draft-ietf-
httpbis-semantics-19, 12 September 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-
semantics-19>.
[I-D.draft-ietf-httpbis-semantics]
Fielding, R. T., Nottingham, M., and J. Reschke, "HTTP
Semantics", Work in Progress, Internet-Draft, draft-ietf-
httpbis-semantics-19, 12 September 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-
semantics-19>.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
November 1987, <https://www.rfc-editor.org/rfc/rfc1035>.
[RFC1928] Leech, M., Ganis, M., Lee, Y., Kuris, R., Koblas, D., and
L. Jones, "SOCKS Protocol Version 5", RFC 1928,
DOI 10.17487/RFC1928, March 1996,
<https://www.rfc-editor.org/rfc/rfc1928>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/rfc/rfc2119>.
Schwartz, et al. Expires 15 April 2022 [Page 42]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
[RFC2181] Elz, R. and R. Bush, "Clarifications to the DNS
Specification", RFC 2181, DOI 10.17487/RFC2181, July 1997,
<https://www.rfc-editor.org/rfc/rfc2181>.
[RFC3225] Conrad, D., "Indicating Resolver Support of DNSSEC",
RFC 3225, DOI 10.17487/RFC3225, December 2001,
<https://www.rfc-editor.org/rfc/rfc3225>.
[RFC3597] Gustafsson, A., "Handling of Unknown DNS Resource Record
(RR) Types", RFC 3597, DOI 10.17487/RFC3597, September
2003, <https://www.rfc-editor.org/rfc/rfc3597>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/rfc/rfc5234>.
[RFC5952] Kawamura, S. and M. Kawashima, "A Recommendation for IPv6
Address Text Representation", RFC 5952,
DOI 10.17487/RFC5952, August 2010,
<https://www.rfc-editor.org/rfc/rfc5952>.
[RFC6066] Eastlake 3rd, D., "Transport Layer Security (TLS)
Extensions: Extension Definitions", RFC 6066,
DOI 10.17487/RFC6066, January 2011,
<https://www.rfc-editor.org/rfc/rfc6066>.
[RFC6147] Bagnulo, M., Sullivan, A., Matthews, P., and I. van
Beijnum, "DNS64: DNS Extensions for Network Address
Translation from IPv6 Clients to IPv4 Servers", RFC 6147,
DOI 10.17487/RFC6147, April 2011,
<https://www.rfc-editor.org/rfc/rfc6147>.
[RFC7050] Savolainen, T., Korhonen, J., and D. Wing, "Discovery of
the IPv6 Prefix Used for IPv6 Address Synthesis",
RFC 7050, DOI 10.17487/RFC7050, November 2013,
<https://www.rfc-editor.org/rfc/rfc7050>.
[RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
DOI 10.17487/RFC7231, June 2014,
<https://www.rfc-editor.org/rfc/rfc7231>.
[RFC7595] Thaler, D., Ed., Hansen, T., and T. Hardie, "Guidelines
and Registration Procedures for URI Schemes", BCP 35,
RFC 7595, DOI 10.17487/RFC7595, June 2015,
<https://www.rfc-editor.org/rfc/rfc7595>.
Schwartz, et al. Expires 15 April 2022 [Page 43]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
[RFC7871] Contavalli, C., van der Gaast, W., Lawrence, D., and W.
Kumari, "Client Subnet in DNS Queries", RFC 7871,
DOI 10.17487/RFC7871, May 2016,
<https://www.rfc-editor.org/rfc/rfc7871>.
[RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for
Writing an IANA Considerations Section in RFCs", BCP 26,
RFC 8126, DOI 10.17487/RFC8126, June 2017,
<https://www.rfc-editor.org/rfc/rfc8126>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
<https://www.rfc-editor.org/rfc/rfc8446>.
[WebSocket]
Fette, I. and A. Melnikov, "The WebSocket Protocol",
RFC 6455, DOI 10.17487/RFC6455, December 2011,
<https://www.rfc-editor.org/rfc/rfc6455>.
17.2. Informative References
[AltSvc] Nottingham, M., McManus, P., and J. Reschke, "HTTP
Alternative Services", RFC 7838, DOI 10.17487/RFC7838,
April 2016, <https://www.rfc-editor.org/rfc/rfc7838>.
[DNSTerm] Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
Terminology", BCP 219, RFC 8499, DOI 10.17487/RFC8499,
January 2019, <https://www.rfc-editor.org/rfc/rfc8499>.
[FETCH] "Fetch Living Standard", May 2020,
<https://fetch.spec.whatwg.org/>.
[HTTP3] Bishop, M., "Hypertext Transfer Protocol Version 3
(HTTP/3)", Work in Progress, Internet-Draft, draft-ietf-
quic-http-34, 2 February 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-quic-
http-34>.
[I-D.bellis-dnsop-http-record]
Bellis, R., "A DNS Resource Record for HTTP", Work in
Progress, Internet-Draft, draft-bellis-dnsop-http-record-
00, 3 November 2018,
<https://datatracker.ietf.org/doc/html/draft-bellis-dnsop-
http-record-00>.
Schwartz, et al. Expires 15 April 2022 [Page 44]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
[I-D.ietf-dnsop-aname]
Finch, T., Hunt, E., Dijk, P. V., Eden, A., and M.
Mekking, "Address-specific DNS aliases (ANAME)", Work in
Progress, Internet-Draft, draft-ietf-dnsop-aname-04, 8
July 2019, <https://datatracker.ietf.org/doc/html/draft-
ietf-dnsop-aname-04>.
[RFC6454] Barth, A., "The Web Origin Concept", RFC 6454,
DOI 10.17487/RFC6454, December 2011,
<https://www.rfc-editor.org/rfc/rfc6454>.
[SRV] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
specifying the location of services (DNS SRV)", RFC 2782,
DOI 10.17487/RFC2782, February 2000,
<https://www.rfc-editor.org/rfc/rfc2782>.
[URI] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/rfc/rfc3986>.
Appendix A. Decoding text in zone files
DNS zone files are capable of representing arbitrary octet sequences
in basic ASCII text, using various delimiters and encodings. The
algorithm for decoding these character-strings is defined in
Section 5.1 of [RFC1035]. Here we summarize the allowed input to
that algorithm, using ABNF:
; non-special is VCHAR minus DQUOTE, ";", "(", ")", and "\".
non-special = %x21 / %x23-27 / %x2A-3A / %x3C-5B / %x5D-7E
; non-digit is VCHAR minus DIGIT
non-digit = %x21-2F / %x3A-7E
; dec-octet is a number 0-255 as a three-digit decimal number.
dec-octet = ( "0" / "1" ) 2DIGIT /
"2" ( ( %x30-34 DIGIT ) / ( "5" %x30-35 ) )
escaped = "\" ( non-digit / dec-octet )
contiguous = 1*( non-special / escaped )
quoted = DQUOTE *( contiguous / ( ["\"] WSP ) ) DQUOTE
char-string = contiguous / quoted
The decoding algorithm allows char-string to represent any *OCTET.
In this document, this algorithm is referred to as "character-string
decoding". The algorithm is the same as used by <character-string>
in RFC 1035, although the output length in this document is not
limited to 255 octets.
Schwartz, et al. Expires 15 April 2022 [Page 45]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
A.1. Decoding a comma-separated list
In order to represent lists of items in zone files, this
specification uses comma-separated lists. When the allowed items in
the list cannot contain "," or "\", this is trivial. (For
simplicity, empty items are not allowed.) A value-list parser that
splits on "," and prohibits items containing "\" is sufficient to
comply with all requirements in this document.
For implementations that allow "," and "\" in item values, the
following escaping syntax applies:
item = 1*OCTET
; item-allowed is OCTET minus "," and "\".
item-allowed = %x00-2B / %x2D-5B / %x5D-FF
escaped-item = 1*(item-allowed / "\," / "\\")
comma-separated = [escaped-item *("," escaped-item)]
Decoding of value-lists happens after character-string decoding. For
example, consider these char-string SvcParamValues:
"part1,part2,part3\\,part4\\\\"
part1\,\p\a\r\t2\044part3\092,part4\092\\
These inputs are equivalent: character-string decoding either of them
would produce the same value:
part1,part2,part3\,part4\\
Applying comma-separated list decoding to this value would produce a
list of three items:
part1
part2
part3,part4\
Appendix B. HTTP Mapping Summary
This table serves as a non-normative summary of the HTTP mapping for
SVCB (Section 9). Future protocol mappings may provide a similar
summary table.
Schwartz, et al. Expires 15 April 2022 [Page 46]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
+==========================+======================+
+==========================+======================+
| *Mapped scheme* | "https" |
+--------------------------+----------------------+
| *Other affected schemes* | "http", "wss", "ws", |
| | (other HTTP-based) |
+--------------------------+----------------------+
| *RR type* | HTTPS (65) |
+--------------------------+----------------------+
| *Name prefix* | None for port 443, |
| | else _$PORT._https |
+--------------------------+----------------------+
| *Automatically Mandatory | port, no-default- |
| Keys* | alpn |
+--------------------------+----------------------+
| *SvcParam defaults* | alpn: ["http/1.1"] |
+--------------------------+----------------------+
| *Special behaviors* | HTTP to HTTPS |
| | upgrade |
+--------------------------+----------------------+
| *Keys that records must | None |
| include* | |
+--------------------------+----------------------+
Table 3
Appendix C. Comparison with alternatives
The SVCB and HTTPS RR types closely resemble, and are inspired by,
some existing record types and proposals. A complaint with all of
the alternatives is that web clients have seemed unenthusiastic about
implementing them. The hope here is that by providing an extensible
solution that solves multiple problems we will overcome the inertia
and have a path to achieve client implementation.
C.1. Differences from the SRV RR type
An SRV record [SRV] can perform a similar function to the SVCB
record, informing a client to look in a different location for a
service. However, there are several differences:
* SRV records are typically mandatory, whereas SVCB is intended to
be optional when used with pre-existing protocols.
* SRV records cannot instruct the client to switch or upgrade
protocols, whereas SVCB can signal such an upgrade (e.g. to
HTTP/2).
Schwartz, et al. Expires 15 April 2022 [Page 47]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
* SRV records are not extensible, whereas SVCB and HTTPS RRs can be
extended with new parameters.
* SRV records specify a "weight" for unbalanced randomized load-
balancing. SVCB only supports balanced randomized load-balancing,
although weights could be added via a future SvcParam.
C.2. Differences from the proposed HTTP record
Unlike [I-D.bellis-dnsop-http-record], this approach is extensible to
cover Alt-Svc and Encrypted ClientHello use-cases. Like that
proposal, this addresses the zone apex CNAME challenge.
Like that proposal, it remains necessary to continue to include
address records at the zone apex for legacy clients.
C.3. Differences from the proposed ANAME record
Unlike [I-D.ietf-dnsop-aname], this approach is extensible to cover
Alt-Svc and ECH use-cases. This approach also does not require any
changes or special handling on either authoritative or primary
servers, beyond optionally returning in-bailiwick additional records.
Like that proposal, this addresses the zone apex CNAME challenge for
clients that implement this.
However, with this SVCB proposal, it remains necessary to continue to
include address records at the zone apex for legacy clients. If
deployment of this standard is successful, the number of legacy
clients will fall over time. As the number of legacy clients
declines, the operational effort required to serve these users
without the benefit of SVCB indirection should fall. Server
operators can easily observe how much traffic reaches this legacy
endpoint, and may remove the apex's address records if the observed
legacy traffic has fallen to negligible levels.
C.4. Comparison with separate RR types for AliasMode and ServiceMode
Abstractly, functions of AliasMode and ServiceMode are independent,
so it might be tempting to specify them as separate RR types.
However, this would result in a serious performance impairment,
because clients cannot rely on their recursive resolver to follow
SVCB aliases (unlike CNAME). Thus, clients would have to issue
queries for both RR types in parallel, potentially at each step of
the alias chain. Recursive resolvers that implement the
specification would, upon receipt of a ServiceMode query, emit both a
ServiceMode and an AliasMode query to the authoritative. Thus,
splitting the RR type would double, or in some cases triple, the load
Schwartz, et al. Expires 15 April 2022 [Page 48]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
on clients and servers, and would not reduce implementation
complexity.
Appendix D. Test vectors
These test vectors only contain the RDATA portion of SVCB/HTTPS
records in presentation format, generic format ([RFC3597]) and wire
format. The wire format uses hexadecimal (\xNN) for each non-ascii
byte. As the wireformat is long, it is broken into several lines.
D.1. AliasMode
example.com. HTTPS 0 foo.example.com.
\# 19 (
00 00 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
)
\x00\x00 # priority
\x03foo\x07example\x03com\x00 # target
Figure 1: AliasMode
D.2. ServiceMode
example.com. SVCB 1 .
\# 3 (
00 01 ; priority
00 ; target (root label)
)
\x00\x01 # priority
\x00 # target, root label
Figure 2: TargetName is "."
Schwartz, et al. Expires 15 April 2022 [Page 49]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example.com. SVCB 16 foo.example.com. port=53
\# 25 (
00 10 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
00 03 ; key 3
00 02 ; length 2
00 35 ; value
)
\x00\x10 # priority
\x03foo\x07example\x03com\x00 # target
\x00\x03 # key 3
\x00\x02 # length: 2 bytes
\x00\x35 # value
Figure 3: Specifies a port
example.com. SVCB 1 foo.example.com. key667=hello
\# 28 (
00 01 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
02 9b ; key 667
00 05 ; length 5
68 65 6c 6c 6f ; value
)
\x00\x01 # priority
\x03foo\x07example\x03com\x00 # target
\x02\x9b # key 667
\x00\x05 # length 5
hello # value
Figure 4: A generic key and unquoted value
Schwartz, et al. Expires 15 April 2022 [Page 50]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example.com. SVCB 1 foo.example.com. key667="hello\210qoo"
\# 32 (
00 01 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
02 9b ; key 667
00 09 ; length 9
68 65 6c 6c 6f d2 71 6f 6f ; value
)
\x00\x01 # priority
\x03foo\x07example\x03com\x00 # target
\x02\x9b # key 667
\x00\x09 # length 9
hello\xd2qoo # value
Figure 5: A generic key and quoted value with a decimal escape
example.com. SVCB 1 foo.example.com. (
ipv6hint="2001:db8::1,2001:db8::53:1"
)
\# 55 (
00 01 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
00 06 ; key 6
00 20 ; length 32
20 01 0d b8 00 00 00 00 00 00 00 00 00 00 00 01 ; first address
20 01 0d b8 00 00 00 00 00 00 00 00 00 53 00 01 ; second address
)
\x00\x01 # priority
\x03foo\x07example\x03com\x00 # target
\x00\x06 # key 6
\x00\x20 # length 32
\x20\x01\x0d\xb8\x00\x00\x00\x00
\x00\x00\x00\x00\x00\x00\x00\x01 # first address
\x20\x01\x0d\xb8\x00\x00\x00\x00
\x00\x00\x00\x00\x00\x53\x00\x01 # second address
Figure 6: Two quoted IPv6 hints
Schwartz, et al. Expires 15 April 2022 [Page 51]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example.com. SVCB 1 example.com. ipv6hint="::ffff:198.51.100.100"
\# 35 (
00 01 ; priority
07 65 78 61 6d 70 6c 65 03 63 6f 6d 00 ; target
00 06 ; key 6
00 10 ; length 16
00 00 00 00 00 00 00 00 00 00 ff ff c6 33 64 64 ; address
)
\x00\x01 # priority
\x07example\x03com\x00 # target
\x00\x06 # key 6
\x00\x10 # length 16
\x00\x00\x00\x00\x00\x00\x00\x00
\x00\x00\xff\xff\xc6\x33\x64\x64 # address
Figure 7: An IPv6 hint in IPv4-mapped format
Schwartz, et al. Expires 15 April 2022 [Page 52]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example.com. SVCB 16 foo.example.org. (
alpn=h2,h3-19 mandatory=ipv4hint,alpn
ipv4hint=192.0.2.1
)
\# 48 (
00 10 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 6f 72 67 00 ; target
00 00 ; key 0
00 04 ; param length 4
00 01 ; value: key 1
00 04 ; value: key 4
00 01 ; key 1
00 09 ; param length 9
02 ; alpn length 2
68 32 ; alpn value
05 ; alpn length 5
68 33 2d 31 39 ; alpn value
00 04 ; key 4
00 04 ; param length 4
c0 00 02 01 ; param value
)
\x00\x10 # priority
\x03foo\x07example\x03org\x00 # target
\x00\x00 # key 0
\x00\x04 # param length 4
\x00\x01 # value: key 1
\x00\x04 # value: key 4
\x00\x01 # key 1
\x00\x09 # param length 9
\x02 # alpn length 2
h2 # alpn value
\x05 # alpn length 5
h3-19 # alpn value
\x00\x04 # key 4
\x00\x04 # param length 4
\xc0\x00\x02\x01 # param value
Figure 8: SvcParamKey ordering is arbitrary in presentation
format but sorted in wire format
Schwartz, et al. Expires 15 April 2022 [Page 53]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
example.com. SVCB 16 foo.example.org. alpn="f\\\\oo\\,bar,h2"
example.com. SVCB 16 foo.example.org. alpn=f\\\092oo\092,bar,h2
\# 35 (
00 10 ; priority
03 66 6f 6f 07 65 78 61 6d 70 6c 65 03 6f 72 67 00 ; target
00 01 ; key 1
00 0c ; param length 12
08 ; alpn length 8
66 5c 6f 6f 2c 62 61 72 ; alpn value
02 ; alpn length 2
68 32 ; alpn value
)
\x00\x10 # priority
\x03foo\x07example\x03org\x00 # target
\x00\x01 # key 1
\x00\x0c # param length 12
\x08 # alpn length 8
f\oo,bar # alpn value
\x02 # alpn length 2
h2 # alpn value
Figure 9: An alpn value with an escaped comma and an escaped
backslash in two presentation formats
D.3. Failure cases
This subsection contains test vectors which are not compliant with
this document. The various reasons for non-compliance are explained
with each example.
example.com. SVCB 1 foo.example.com. (
key123=abc key123=def
)
Figure 10: Multiple instances of the same SvcParamKey
example.com. SVCB 1 foo.example.com. mandatory
example.com. SVCB 1 foo.example.com. alpn
example.com. SVCB 1 foo.example.com. port
example.com. SVCB 1 foo.example.com. ipv4hint
example.com. SVCB 1 foo.example.com. ipv6hint
Figure 11: Missing SvcParamValues that must be nonempty
example.com. SVCB 1 foo.example.com. no-default-alpn=abc
Schwartz, et al. Expires 15 April 2022 [Page 54]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
Figure 12: The "no-default-alpn" SvcParamKey value must be empty
example.com. SVCB 1 foo.example.com. mandatory=key123
Figure 13: A mandatory SvcParam is missing
example.com. SVCB 1 foo.example.com. mandatory=mandatory
Figure 14: The "mandatory" SvcParamKey must not be included in
the mandatory list
example.com. SVCB 1 foo.example.com. (
mandatory=key123,key123 key123=abc
)
Figure 15: Multiple instances of the same SvcParamKey in the
mandatory list
Appendix E. Change history
(This section to be removed by the RFC editor.)
* draft-ietf-dnsop-svcb-https-08
- Extensive structural and editorial adjustments based on area
reviews, including:
o A new section on SVCB-compatible record types
o Reorganized description of client behavior
o Test vectors are now in titled figures
o Adjusted mapping summary
o Improve description of rules for resolver handling of
invalid SvcParamValues.
- New text on cross-transport fallback (e.g. QUIC vs. TCP)
- Improved explanation of use with domain-oriented transport
proxies
- HTTP terminology adjusted to match draft-ietf-httpbis-semantics
- Improved and corrected IANA instructions
* draft-ietf-dnsop-svcb-https-07
Schwartz, et al. Expires 15 April 2022 [Page 55]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
- Editorial improvements following AD review.
* draft-ietf-dnsop-svcb-https-06
- Add requirements for HTTPS origins that also use Alt-Svc
- Remove requirement for comma-escaping related to unusual ALPN
values
- Allow resolvers to reject invalid SvcParamValues, with
additional guidance
* draft-ietf-dnsop-svcb-https-05
- Specify interaction with EDNS Client Subnet and Additional
section caching
- Rename "echconfig" to "ech"
- Add a suite of test vectors (both valid and invalid) and more
examples
- Clarify requirements for resolvers' (non-)use of SvcParams
- Clarify guidance regarding default ALPN values
* draft-ietf-dnsop-svcb-https-04
- Simplify the IANA instructions (pure First Come First Served)
- Recommend against publishing chains of >8 aliases
- Clarify requirements for using SVCB with a transport proxy
- Adjust guidance for Port Prefix Naming
- Minor editorial updates
* draft-ietf-dnsop-svcb-https-03
- Simplified escaping of comma-separated values
- Reorganized client requirements
- Added a warning about port filtering for cross-protocol attacks
- Clarified self-consistency rules for SvcParams
Schwartz, et al. Expires 15 April 2022 [Page 56]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
- Added a non-normative mapping summary table for HTTPS
* draft-ietf-dnsop-svcb-https-02
- Added a Privacy Considerations section
- Adjusted resolution fallback description
- Clarified status of SvcParams in AliasMode
- Improved advice on zone structuring and use with Alt-Svc
- Improved examples, including a new Multi-CDN example
- Reorganized text on value-list parsing and SvcPriority
- Improved phrasing and other editorial improvements throughout
* draft-ietf-dnsop-svcb-https-01
- Added a "mandatory" SvcParamKey
- Added the ability to indicate that a service does not exist
- Adjusted resolution and ALPN algorithms
- Major terminology revisions for "origin" and CamelCase names
- Revised ABNF
- Include allocated RR type numbers
- Various corrections, explanations, and recommendations
* draft-ietf-dnsop-svcb-https-00
- Rename HTTPSSVC RR to HTTPS RR
- Rename "an SVCB" to "a SVCB"
- Removed "design considerations and open issues" section and
some other "to be removed" text
* draft-ietf-dnsop-svcb-httpssvc-03
- Revised chain length limit requirements
- Revised IANA registry rules for SvcParamKeys
Schwartz, et al. Expires 15 April 2022 [Page 57]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
- Require HTTPS clients to implement SNI
- Update terminology for Encrypted ClientHello
- Clarifications: non-default ports, transport proxies, HSTS
procedure, WebSocket behavior, wire format, IP hints, inner/
outer ClientHello with ECH
- Various textual and ABNF corrections
* draft-ietf-dnsop-svcb-httpssvc-02
- All changes to Alt-Svc have been removed
- Expanded and reorganized examples
- Priority zero is now the definition of AliasForm
- Repeated SvcParamKeys are no longer allowed
- The "=" sign may be omitted in a key=value pair if the value is
also empty
- In the wire format, SvcParamKeys must be in sorted order
- New text regarding how to handle resolution timeouts
- Expanded description of recursive resolver behavior
- Much more precise description of the intended ALPN behavior
- Match the HSTS specification's language on HTTPS enforcement
- Removed 'esniconfig=""' mechanism and simplified ESNI
connection logic
* draft-ietf-dnsop-svcb-httpssvc-01
- Reduce the emphasis on conversion between HTTPSSVC and Alt-Svc
- Make the "untrusted channel" concept more precise.
- Make SvcFieldPriority = 0 the definition of AliasForm, instead
of a requirement.
* draft-ietf-dnsop-svcb-httpssvc-00
Schwartz, et al. Expires 15 April 2022 [Page 58]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
- Document an optimization for optimistic pre-connection. (Chris
Wood)
- Relax IP hint handling requirements. (Eric Rescorla)
* draft-nygren-dnsop-svcb-httpssvc-00
- Generalize to an SVCB record, with special-case handling for
Alt-Svc and HTTPS separated out to dedicated sections.
- Split out a separate HTTPSSVC record for the HTTPS use-case.
- Remove the explicit SvcRecordType=0/1 and instead make the
AliasForm vs ServiceForm be implicit. This was based on
feedback recommending against subtyping RR type.
- Remove one optimization.
* draft-nygren-httpbis-httpssvc-03
- Change redirect type for HSTS-style behavior from 302 to 307 to
reduce ambiguities.
* draft-nygren-httpbis-httpssvc-02
- Remove the redundant length fields from the wire format.
- Define a SvcDomainName of "." for SvcRecordType=1 as being the
HTTPSSVC RRNAME.
- Replace "hq" with "h3".
* draft-nygren-httpbis-httpssvc-01
- Fixes of record name. Replace references to "HTTPSVC" with
"HTTPSSVC".
* draft-nygren-httpbis-httpssvc-00
- Initial version
Authors' Addresses
Ben Schwartz
Google
Email: bemasc@google.com
Schwartz, et al. Expires 15 April 2022 [Page 59]
Internet-Draft SVCB and HTTPS RRs for DNS October 2021
Mike Bishop
Akamai Technologies
Email: mbishop@evequefou.be
Erik Nygren
Akamai Technologies
Email: erik+ietf@nygren.org
Schwartz, et al. Expires 15 April 2022 [Page 60]
