Switching
If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Latest Discussion Posts
-
RE: Radius server configuration options on EX SW
By: LEEBAHI , 2 days agoThat makes complete sense. Appreciated!! ------------------------------ Be kind!! ------------------------------
-
RE: Allow icmp packets in the filter
By: spuluka , 2 days agoThe filter above will deny all traffic to address 172.16.100.2/32. In filters once a match occurs all processing stops. So to allow icmp to 172.16.100.2/32 you would need an accept term just for icmp followed by the reject term above. ------------------------------ ...
-
RE: Allow icmp packets in the filter
By: Sheetanshu , 3 days agoHi, Can you please share the filter configuration with the term to accept icmp? Regards ------------------------------ Sheetanshu Shekhar ------------------------------
-
RE: Radius server configuration options on EX SW
By: MarcTB , 3 days agoGood morning, Let me help to answer your questions, 1) set system radius-server 1.1.1.1 secret test ( This one is to use Radius for authentication towards access (system authentication)of the devices itself) so instead of using a local "username" ...
1 person recommends this. -
Radius server configuration options on EX SW
By: LEEBAHI , 5 days agoHi everyone, I noticed we can configure radius server in two places on EX SW. 1) set system radius-server 1.1.1.1 secret test 2) set access radius-server 1.1.1.1 secret test Can either of the two methods be used for radius configuration ? Or ...
-
Allow icmp packets in the filter
By: demetri stanley , 6 days agoHello, I wrote a filter for a constraint as follows set interfaces ae0 unit 0 family inet filter input closedaccess set firewall family inet filter closedaccess term access from source-address 192.168.1.2/32 set firewall family inet ...
-
RE: Why can I not mix power supplies in the EX4300(-32F)? ...
By: fb35523 , 7 days agoThank you very much for your reply, Maitrya. I do agree that there may well be more than just static electrical characteristics that determine if a PSU combo is usable or not. I'm just curious as to why Juniper along with many other vendors cannot offer ...
Announcements
-
Earth Week AMA
We're excited to announce a unique opportunity to
get your sustainability questions answered by our very own Sustainability Director, Chris Demers!
Unanswered Posts
Top Contributors in the Community
-
4728 Points
-
2738 Points
-
1240 Points
-
1184 Points