Routing
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community.
Need additional guidance? Check out these Juniper Resources.
Documentation Technical Bulletins Knowledge Base Day One Books
Latest Discussion Posts
-
SRX300 sending malformed BGP OPEN messages, without ...
By: leonardogama , 5 hours agoHi, Does anyone already faced one issue related to SRX300 sending malformed BGP OPEN messages, without marker, type and so on. We only see the following pattern in the TCP payload: 12 03 AB CD. These packets cause the remote peer to drop the connection ...
-
RE: Class based forwarding
By: FARID AKHUNDOV , yesterdayHi, I would suggest to try 2 things Try to use IP address instead of interface as next-hop in COS forwarding policy. In policy statement itself, I think accept action is unnecessary for T1 term, just COS next-hop-map should be enough. ------------------------------ ...
-
RE: What is accept-remote-nexthop in EBGP peering
By: FARID AKHUNDOV , yesterdayIn case next hop of the received prefix from eBGP neighbor is not reachable, it will not be accepted. Even if you apply import policy to fix the next hop, the prefix needs to first be ACCEPTED, after which its next can be modified. Classic example is ...
-
RE: What is accept-remote-nexthop in EBGP peering
By: LEEBAHI , yesterdayHi Marc, I know it is old thread but it contains a lot of valuable info. By default, Junos OS does not maintain the route for indirect next hop to forwarding next-hop binding on the Packet Forwarding Engine forwarding table... .so that is why ...
-
RE: SCBE2-MX with MPC7
By: Olivier Benghozi , 2 days agoYes, so you just have to set chassis fabric redundancy-mode increased-bandwidth and that's it. It's still redundant, it's just that in case of failure of one SCB board your bandwidth would suddenly be limited. ------------------------------ Olivier ...
-
Class based forwarding
By: LEEBAHI , 2 days agoHi everyone, I am trying to understand class based forwarding, I have built a sample topology in EVE-NG SRX is running in packet mode. We are running OSPF between SRX1 and SRX2 on all interfaces ( ge-0/0/0, ge-0/0/1, ge-0/0/2, ge-0/0/3). SRX1 ...
-
RE: input filter
By: Matthew Wright , 3 days agoHi, The input filter name suggests a 20Mbps limit with a 2048k burst size. So yes it is likely the problem as it probably has a 20Mbps policer in that filter. Do you have another input filter for 50Mbps? If there is not already one created, I would ...
Announcements
-
Earth Week AMA
We're excited to announce a unique opportunity to
get your sustainability questions answered by our very own Sustainability Director, Chris Demers!
Unanswered Posts
Top Contributors in the Community
-
4846 Points
-
3670 Points
-
2072 Points
-
1050 Points